From: Dzmitry Sankouski dsankouski@gmail.com
U-boot is intended to replace linux kernel in android boot image(ABL), and it's FIT payload to replace initramfs file. The boot process is similar to boot image with linux: - android bootloader (ABL) unpacks android boot image - ABL sets `linux,initrd-start property` in chosen node in unpacked FDT - ABL sets x0 register to FDT address, and passes control to u-boot - u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable - u-boot reads `linux,initrd-start` property, and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env variable, and boils down to `bootm $prevbl_initrd_start_addr`. If more control on boot process is desired, pack a boot script in FIT image, and put it to default configuration
What done: - Rearrange defconfig option order - Add CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR option - Doc updates: - remove wrong SBOOT memory corruption note, because memory is changed during u-boot bringup process, not by SBOOT - put payload on ramdisk place in abl boot image creation step
Signed-off-by: sankouski-dzmitry sankouski.dzmitry@gmail.com Minkyu Kang mk7.kang@samsung.com --- configs/a3y17lte_defconfig | 11 ++++++----- configs/a5y17lte_defconfig | 10 ++++++---- configs/a7y17lte_defconfig | 10 ++++++---- doc/board/samsung/axy17lte.rst | 15 +++------------ include/configs/exynos78x0-common.h | 1 + 5 files changed, 22 insertions(+), 25 deletions(-)
diff --git a/configs/a3y17lte_defconfig b/configs/a3y17lte_defconfig index ddc1801a59..80a7f93325 100644 --- a/configs/a3y17lte_defconfig +++ b/configs/a3y17lte_defconfig @@ -1,13 +1,14 @@ CONFIG_ARM=y -CONFIG_SYS_CONFIG_NAME="exynos78x0-common" -CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_EXYNOS=y -CONFIG_SYS_TEXT_BASE=0x40001000 CONFIG_ARCH_EXYNOS7=y CONFIG_TARGET_A3Y17LTE=y +CONFIG_SYS_CONFIG_NAME="exynos78x0-common" +CONFIG_SYS_TEXT_BASE=0x40001000 +CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_NR_DRAM_BANKS=8 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" -CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_HUSH_PARSER=y CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" @@ -16,4 +17,4 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_DM_I2C_GPIO=y -CONFIG_PINCTRL_EXYNOS78x0=y +CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y diff --git a/configs/a5y17lte_defconfig b/configs/a5y17lte_defconfig index 2534ab0573..c7d4baf67b 100644 --- a/configs/a5y17lte_defconfig +++ b/configs/a5y17lte_defconfig @@ -1,13 +1,14 @@ CONFIG_ARM=y -CONFIG_SYS_CONFIG_NAME="exynos78x0-common" -CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_EXYNOS=y -CONFIG_SYS_TEXT_BASE=0x40001000 CONFIG_ARCH_EXYNOS7=y CONFIG_TARGET_A5Y17LTE=y +CONFIG_SYS_CONFIG_NAME="exynos78x0-common" +CONFIG_SYS_TEXT_BASE=0x40001000 +CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_NR_DRAM_BANKS=12 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" -CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_HUSH_PARSER=y CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" @@ -16,3 +17,4 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_DM_I2C_GPIO=y +CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y diff --git a/configs/a7y17lte_defconfig b/configs/a7y17lte_defconfig index a2d76377ab..20a7fb1a8b 100644 --- a/configs/a7y17lte_defconfig +++ b/configs/a7y17lte_defconfig @@ -1,13 +1,14 @@ CONFIG_ARM=y -CONFIG_SYS_CONFIG_NAME="exynos78x0-common" -CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_ARCH_EXYNOS=y -CONFIG_SYS_TEXT_BASE=0x40001000 CONFIG_ARCH_EXYNOS7=y CONFIG_TARGET_A7Y17LTE=y +CONFIG_SYS_CONFIG_NAME="exynos78x0-common" +CONFIG_SYS_TEXT_BASE=0x40001000 +CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_NR_DRAM_BANKS=12 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" -CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_HUSH_PARSER=y CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" @@ -16,3 +17,4 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_DM_I2C_GPIO=y +CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y diff --git a/doc/board/samsung/axy17lte.rst b/doc/board/samsung/axy17lte.rst index e84fefec70..b7f299d1c7 100644 --- a/doc/board/samsung/axy17lte.rst +++ b/doc/board/samsung/axy17lte.rst @@ -66,26 +66,17 @@ and is therefore SBOOT's payload. It may be pure u-boot (with loading u-boot's payload from flash in mind), or u-boot + u-boot's payload.
-It should be kept in mind, that SBOOT binary patches it's payload after loading -in address range 0x401f8550-0x401f9280. Given SBOOT loads payload to 0x40001000, -a range of 0x1f7550-0x1f8280 (2061648-2065024) in a payload file -will be corrupted after loading to RAM. - Creating payload file """"""""""""""""""""" - Assemble FIT image for your kernel -- Create a file for u-boot payload ``touch sboot-payload`` -- Write zeroes till 0x200000 address to be sure SBOOT won't corrupt your info - ``dd if=/dev/zero of=sboot-payload bs=$((0x200000)) count=1`` -- Write u-boot to the start of the payload ``dd if=<u-boot.bin path> of=sboot-payload`` -- Write FIT image to payload from 0x200000 address - ``dd if=<FIT image path> of=sboot-payload seek=1 bs=2M``
Creating android boot image """"""""""""""""""""""""""" Once payload created, it's time for android image::
- mkbootimg --base 0x40000000 --kernel_offset 0x00000000 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --pagesize 2048 --second_offset 0x00f00000 --kernel <sboot-payload path> -o uboot.img + uboot=<path to u-boot.bin file> + ramdisk=<path to FIT payload file> + mkbootimg --base 0x40000000 --kernel_offset 0x00000000 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --pagesize 2048 --second_offset 0x00f00000 --kernel "$uboot" --ramdisk "$ramdisk" -o uboot.img
Note, that stock Samsung bootloader ignores offsets, set in mkbootimg.
diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 8d3449f028..c4c41bf3e8 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -85,6 +85,7 @@ #endif
#define EXTRA_ENV_SETTINGS \ + "bootcmd=bootm $prevbl_initrd_start_addr\0" \ EXYNOS_DEVICE_SETTINGS \ EXYNOS_FDTFILE_SETTING \ MEM_LAYOUT_ENV_SETTINGS