[U-Boot-Users] Booting ELDK 4.0 kernel on MPC8548CDS

Hi,

I'm using a MPC8548CDS eval system with u-boot 1.1.6 running on it. When trying to boot an ELDK 4.0 kernel, the board hangs immediately after decompression of the kernel. I've set the disable_of environment variable to avoid usage of the flat device tree.

The same kernel boots properly when using u-boot 1.1.3 which is delivered with the eval system.

Any hints would be appreciated.

Best regards,

Thomas Schafer

____________________________________

Kontron Modular Computers GmbH

Heinrich-Barth-Str. 1a 66115 Saarbrucken

Tel.: + 49 (0)681 / 95916 - 203 Fax: + 49 (0)681 / 95916 - 100 E-mail: thomas.schaefer@kontron.com