BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the original ARCH_BCM68360 support and migrate its configuration and dts settings. This includes: - Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder. - Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string. - Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file.
Signed-off-by: William Zhang william.zhang@broadcom.com ---
arch/arm/Kconfig | 7 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm68360.dtsi | 217 ----------------------- arch/arm/dts/bcm6856.dtsi | 149 ++++++++++++++++ arch/arm/dts/bcm968360bg.dts | 6 +- board/broadcom/bcm968360bg/Kconfig | 17 -- board/broadcom/bcm968360bg/MAINTAINERS | 6 - board/broadcom/bcm968360bg/Makefile | 3 - board/broadcom/bcm968360bg/bcm968360bg.c | 62 ------- configs/bcm968360bg_ram_defconfig | 10 +- include/configs/bcm96856.h | 4 + include/configs/broadcom_bcm968360bg.h | 32 ---- 12 files changed, 163 insertions(+), 356 deletions(-) delete mode 100644 arch/arm/dts/bcm68360.dtsi delete mode 100644 board/broadcom/bcm968360bg/Kconfig delete mode 100644 board/broadcom/bcm968360bg/MAINTAINERS delete mode 100644 board/broadcom/bcm968360bg/Makefile delete mode 100644 board/broadcom/bcm968360bg/bcm968360bg.c delete mode 100644 include/configs/broadcom_bcm968360bg.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index da4defa08466..3f124ab0ce85 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -672,12 +672,6 @@ config ARCH_BCM6753 select OF_CONTROL imply CMD_DM
-config ARCH_BCM68360 - bool "Broadcom BCM68360 family" - select DM - select OF_CONTROL - imply CMD_DM - config ARCH_BCM6858 bool "Broadcom BCM6858 family" select DM @@ -2280,7 +2274,6 @@ source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm96753ref/Kconfig" -source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a32bdf8c9f17..a0ea9fa6029d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-4-b.dtb
-dtb-$(CONFIG_ARCH_BCM68360) += \ - bcm968360bg.dtb - dtb-$(CONFIG_ARCH_BCM6753) += \ bcm96753ref.dtb
@@ -1183,7 +1180,8 @@ dtb-$(CONFIG_BCM6813) += \ dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb dtb-$(CONFIG_BCM6856) += \ - bcm96856.dtb + bcm96856.dtb \ + bcm968360bg.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtb
diff --git a/arch/arm/dts/bcm68360.dtsi b/arch/arm/dts/bcm68360.dtsi deleted file mode 100644 index 7bbe207794eb..000000000000 --- a/arch/arm/dts/bcm68360.dtsi +++ /dev/null @@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2020 Philippe Reynes philippe.reynes@softathome.com - */ - -#include "skeleton64.dtsi" - -/ { - compatible = "brcm,bcm68360"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - spi0 = &hsspi; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - u-boot,dm-pre-reloc; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - l2: l2-cache0 { - compatible = "cache"; - u-boot,dm-pre-reloc; - }; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - u-boot,dm-pre-reloc; - - periph_osc: periph-osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - u-boot,dm-pre-reloc; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_osc>; - clock-mult = <2>; - clock-div = <1>; - }; - - refclk50mhz: refclk50mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; - }; - - ubus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - u-boot,dm-pre-reloc; - - wdt1: watchdog@ff800480 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x0 0xff800480 0x0 0x14>; - clocks = <&refclk50mhz>; - }; - - wdt2: watchdog@ff8004c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x0 0xff8004c0 0x0 0x14>; - clocks = <&refclk50mhz>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - uart0: serial@ff800640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x0 0xff800640 0x0 0x18>; - clocks = <&periph_osc>; - - status = "disabled"; - }; - - leds: led-controller@ff800800 { - compatible = "brcm,bcm6858-leds"; - reg = <0x0 0xff800800 0x0 0xe4>; - - status = "disabled"; - }; - - gpio0: gpio-controller@0xff800500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800500 0x0 0x4>, - <0x0 0xff800520 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@0xff800504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800504 0x0 0x4>, - <0x0 0xff800524 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@0xff800508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800508 0x0 0x4>, - <0x0 0xff800528 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@0xff80050c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff80050c 0x0 0x4>, - <0x0 0xff80052c 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@0xff800510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800510 0x0 0x4>, - <0x0 0xff800530 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@0xff800514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800514 0x0 0x4>, - <0x0 0xff800534 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@0xff800518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800518 0x0 0x4>, - <0x0 0xff800538 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@0xff80051c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff80051c 0x0 0x4>, - <0x0 0xff80053c 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - hsspi: spi-controller@ff801000 { - compatible = "brcm,bcm6328-hsspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0xff801000 0x0 0x600>; - clocks = <&hsspi_pll>, <&hsspi_pll>; - clock-names = "hsspi", "pll"; - spi-max-frequency = <100000000>; - num-cs = <8>; - - status = "disabled"; - }; - - nand: nand-controller@ff801800 { - compatible = "brcm,nand-bcm68360", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x0 0xff801800 0x0 0x180>, - <0x0 0xff802000 0x0 0x10>, - <0x0 0xff801c00 0x0 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6856.dtsi b/arch/arm/dts/bcm6856.dtsi index 0bce6497219f..475e456d3e3d 100644 --- a/arch/arm/dts/bcm6856.dtsi +++ b/arch/arm/dts/bcm6856.dtsi @@ -54,11 +54,29 @@ };
clocks: clocks { + u-boot,dm-pre-reloc; + periph_clk:periph-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-mult = <2>; + clock-div = <1>; + }; + + wdt_clk: wdt-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; };
psci { @@ -90,6 +108,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + u-boot,dm-pre-reloc;
uart0: serial@640 { compatible = "brcm,bcm6345-uart"; @@ -99,5 +118,135 @@ clock-names = "refclk"; status = "disabled"; }; + + wdt1: watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x14>; + clocks = <&wdt_clk>; + }; + + wdt2: watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x14>; + clocks = <&wdt_clk>; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdt1>; + }; + + leds: led-controller@800 { + compatible = "brcm,bcm6858-leds"; + reg = <0x800 0xe4>; + + status = "disabled"; + }; + + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x4>, + <0x520 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio1: gpio-controller@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x4>, + <0x524 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio2: gpio-controller@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x4>, + <0x528 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio3: gpio-controller@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x4>, + <0x52c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio4: gpio-controller@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x4>, + <0x530 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio5: gpio-controller@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x4>, + <0x534 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio6: gpio-controller@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x4>, + <0x538 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio7: gpio-controller@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x4>, + <0x53c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + hsspi: spi-controller@1000 { + compatible = "brcm,bcm6328-hsspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll>, <&hsspi_pll>; + clock-names = "hsspi", "pll"; + spi-max-frequency = <100000000>; + num-cs = <8>; + + status = "disabled"; + }; + + nand: nand-controller@1800 { + compatible = "brcm,nand-bcm68360", + "brcm,brcmnand-v5.0", + "brcm,brcmnand"; + reg-names = "nand", "nand-int-base", "nand-cache"; + reg = <0x1800 0x180>, + <0x2000 0x10>, + <0x1c00 0x200>; + parameter-page-big-endian = <0>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/dts/bcm968360bg.dts b/arch/arm/dts/bcm968360bg.dts index c060294cc925..6f1090aa8eee 100644 --- a/arch/arm/dts/bcm968360bg.dts +++ b/arch/arm/dts/bcm968360bg.dts @@ -5,11 +5,11 @@
/dts-v1/;
-#include "bcm68360.dtsi" +#include "bcm6856.dtsi"
/ { - model = "Broadcom bcm68360bg"; - compatible = "broadcom,bcm68360bg", "brcm,bcm68360"; + model = "Broadcom BCM968360BG Reference Board"; + compatible = "brcm,bcm968360bg", "brcm,bcm6856", "brcm,bcmbca";
aliases { serial0 = &uart0; diff --git a/board/broadcom/bcm968360bg/Kconfig b/board/broadcom/bcm968360bg/Kconfig deleted file mode 100644 index dd372f126aef..000000000000 --- a/board/broadcom/bcm968360bg/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -if ARCH_BCM68360 - -config SYS_VENDOR - default "broadcom" - -config SYS_BOARD - default "bcm968360bg" - -config SYS_CONFIG_NAME - default "broadcom_bcm968360bg" - -endif - -config TARGET_BCM968360BG - bool "Support Broadcom bcm968360bg" - depends on ARCH_BCM68360 - select ARM64 diff --git a/board/broadcom/bcm968360bg/MAINTAINERS b/board/broadcom/bcm968360bg/MAINTAINERS deleted file mode 100644 index cfcbbc51f8e6..000000000000 --- a/board/broadcom/bcm968360bg/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BCM968360BG BOARD -M: Philippe Reynes philippe.reynes@softathome.com -S: Maintained -F: board/broadcom/bcm968360bg -F: include/configs/broadcom_bcm968360bg.h -F: configs/bcm968360bg_ram_defconfig diff --git a/board/broadcom/bcm968360bg/Makefile b/board/broadcom/bcm968360bg/Makefile deleted file mode 100644 index d099c1cf3569..000000000000 --- a/board/broadcom/bcm968360bg/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += bcm968360bg.o diff --git a/board/broadcom/bcm968360bg/bcm968360bg.c b/board/broadcom/bcm968360bg/bcm968360bg.c deleted file mode 100644 index 90af6b88bd47..000000000000 --- a/board/broadcom/bcm968360bg/bcm968360bg.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2020 Philippe Reynes philippe.reynes@softathome.com - */ - -#include <common.h> -#include <fdtdec.h> -#include <init.h> -#include <linux/io.h> - -#ifdef CONFIG_ARM64 -#include <asm/armv8/mmu.h> - -static struct mm_region broadcom_bcm968360bg_mem_map[] = { - { - /* RAM */ - .virt = 0x00000000UL, - .phys = 0x00000000UL, - .size = 8UL * SZ_1G, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE - }, { - /* SoC */ - .virt = 0x80000000UL, - .phys = 0x80000000UL, - .size = 0xff80000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | - PTE_BLOCK_NON_SHARE | - PTE_BLOCK_PXN | PTE_BLOCK_UXN - }, { - /* List terminator */ - 0, - } -}; - -struct mm_region *mem_map = broadcom_bcm968360bg_mem_map; -#endif - -int board_init(void) -{ - return 0; -} - -int dram_init(void) -{ - if (fdtdec_setup_mem_size_base() != 0) - printf("fdtdec_setup_mem_size_base() has failed\n"); - - return 0; -} - -int dram_init_banksize(void) -{ - fdtdec_setup_memory_banksize(); - - return 0; -} - -int print_cpuinfo(void) -{ - return 0; -} diff --git a/configs/bcm968360bg_ram_defconfig b/configs/bcm968360bg_ram_defconfig index 7f9093c6f6d3..c10e15e04fe8 100644 --- a/configs/bcm968360bg_ram_defconfig +++ b/configs/bcm968360bg_ram_defconfig @@ -1,15 +1,17 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_ARCH_BCM68360=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y CONFIG_SYS_TEXT_BASE=0x10000000 CONFIG_SYS_MALLOC_LEN=0x100000 CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_BCM6856=y +CONFIG_TARGET_BCM96856=y +CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="bcm968360bg" CONFIG_SYS_LOAD_ADDR=0x10000000 -CONFIG_TARGET_BCM968360BG=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000 @@ -52,9 +54,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_CONS_INDEX=0 -CONFIG_DM_SERIAL=y CONFIG_SERIAL_SEARCH_ALL=y -CONFIG_BCM6345_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_BCM63XX_HSSPI=y diff --git a/include/configs/bcm96856.h b/include/configs/bcm96856.h index a7ae71eeaafe..3050cf337229 100644 --- a/include/configs/bcm96856.h +++ b/include/configs/bcm96856.h @@ -8,4 +8,8 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ + #endif diff --git a/include/configs/broadcom_bcm968360bg.h b/include/configs/broadcom_bcm968360bg.h deleted file mode 100644 index 8a8023571236..000000000000 --- a/include/configs/broadcom_bcm968360bg.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2020 Philippe Reynes philippe.reynes@softathome.com - */ - -#include <linux/sizes.h> - -/* - * common - */ - -/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ - 230400, 500000, 1500000 } -/* Memory usage */ - -/* - * 6858 - */ - -/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* U-Boot */ - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - -/* - * 968360bg - */