On Wed, Sep 04, 2013 at 02:16:01PM +0200, Heiko Schocher wrote:
if phy_connect() did not find a phy, phydev is not initialized and following code in cpsw_phy_init() maybe crashes. Fix this.
Signed-off-by: Heiko Schocher hs@denx.de Cc: Joe Hershberger joe.hershberger@gmail.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: Tom Rini trini@ti.com
Found on the dxr2 board with no phy connected to the board, U-Boot crashes with:
U-Boot 2013.07-12701-gea98378-dirty (Sep 04 2013 - 06:58:16)
I2C: ready DRAM: 128 MiB Enable d-cache FactorySet is not right in eeprom. NAND: 256 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 8-bit BCH HW ECC selected Net: Could not get PHY for cpsw: addr 0 data abort
MAYBE you should read doc/README.arm-unaligned-accessespc : [<87f80574>] lr : [<87f80fcc>] sp : 86f5aee0 ip : 00000034 fp : 80100020 r10: 00000014 r9 : 07e5d000 r8 : 86f5af30 r7 : 86f5f750 r6 : 86f5f804 r5 : 86f5f708 r4 : 86f5f750 r3 : 00000000 r2 : 00000000 r1 : 87fa4d08 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 Resetting CPU ...
resetting ...
drivers/net/cpsw.c | 3 +++ 1 Datei ge??ndert, 3 Zeilen hinzugef??gt(+)
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index 9bab71a..b18d528 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -947,6 +947,9 @@ static int cpsw_phy_init(struct eth_device *dev, struct cpsw_slave *slave) dev, slave->data->phy_if);
- if (!phydev)
return -1;- phydev->supported &= supported; phydev->advertising = phydev->supported;
This isn't really an unaligned access problem it's a NULL pointer dereference, so I'll re-word the commit message when I grab this for u-boot-ti soon.