Hi Wolfgang,
On Tuesday 26 August 2008, Wolfgang Ocker wrote:
This patch allows a managed switch like the 88E6083 to be directly connected to a 4xx using PHY mode.
It avoids waiting for a link (it's always there) and uses fixed values for speed and duplex mode since both settings are hardware controlled.
Should I use "FIXED" instead of "UNMANAGED" (so called in the kernel afair)?
Support unmanaged/fixed PHYs like port 8/9 of Marvell 88E6083 on 4xx.
Added config vars CONFIG_UNMANAGED_PHY, CONFIG_UNMANAGED_PHY_SPEED and CONFIG_UNMANAGED_PHY_FULL_DUPLEX to allow unmanaged PHYs and to configure the settings for speed and duplex mode.
This commit:
78d78236896d62bb8ca7302af38d8f1493eb2651
ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
This patch adds GPCS, SGMII and M88E1112 PHY support for the AMCC PPC460GT/EX processors.
Signed-off-by: Victor Gallardo vgallardo@amcc.com Signed-off-by: Stefan Roese sr@denx.de
added PPC4xx support for this "fixed" PHY's. Please take a look at it to see if you can use it for your board/PHY as well. I think it should be generic enough for your case.
If you don't tell me otherwise, I view your patch as obsolete.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================