When using FIT to load firmware builds for multiple models, the FIT must include a common binary along with a number of devicetree blobs, one for each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these devicetree blobs.
Signed-off-by: Simon Glass sjg@chromium.org ---
doc/develop/spl.rst | 2 + tools/binman/entries.rst | 29 +++++++++++ tools/binman/etype/fit.py | 69 +++++++++++++++++++++++-- tools/binman/ftest.py | 35 +++++++++++++ tools/binman/main.py | 2 + tools/binman/test/335_fit_fdt_phase.dts | 61 ++++++++++++++++++++++ 6 files changed, 193 insertions(+), 5 deletions(-) create mode 100644 tools/binman/test/335_fit_fdt_phase.dts
diff --git a/doc/develop/spl.rst b/doc/develop/spl.rst index 0a3e572310a..4bb48e6b7b3 100644 --- a/doc/develop/spl.rst +++ b/doc/develop/spl.rst @@ -121,6 +121,8 @@ Use `spl_phase()` to find the current U-Boot phase, e.g. `PHASE_SPL`. You can also find the previous and next phase and get the phase name.
+.. _fdtgrep_filter: + Device tree ----------- The U-Boot device tree is filtered by the fdtgrep tools during the build diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst index fd8edc64fa2..12482703782 100644 --- a/tools/binman/entries.rst +++ b/tools/binman/entries.rst @@ -953,6 +953,35 @@ The 'fit,compatible' property (if present) is replaced with the compatible string from the root node of the devicetree, so that things work correctly with FIT's configuration-matching algortihm.
+Dealing with phases +~~~~~~~~~~~~~~~~~~~ + +FIT can be used to load firmware. In this case it may be necessary to run +the devicetree for each model through fdtgrep to remove unwanted properties. +The 'fit,fdt-phase' property can be provided to indicate the phase for which +the devicetree is intended. + +For example this indicates that the FDT should be processed for VPL:: + + images { + @fdt-SEQ { + description = "fdt-NAME"; + type = "flat_dt"; + compression = "none"; + fit,fdt-phase = "vpl"; + }; + }; + +Using this mechanism, it is possible to generate a FIT which can provide VPL +images for multiple models, with TPL selecting the correct model to use. The +same approach can of course be used for SPL images. + +Note that the `of-spl-remove-props` entryarg can be used to indicate +additional properties to remove. It is often used to remove properties like +`clock-names` and `pinctrl-names` which are not needed in SPL builds. + +See :ref:`fdtgrep_filter` for more information. + Generating nodes from an ELF file (split-elf) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py index ab827d52066..38358292ece 100644 --- a/tools/binman/etype/fit.py +++ b/tools/binman/etype/fit.py @@ -171,7 +171,7 @@ class Entry_fit(Entry_section): firmware = "atf"; loadables = "uboot"; fdt = "fdt-SEQ"; - fit,compatible; + fit,compatible; // optional }; };
@@ -181,9 +181,38 @@ class Entry_fit(Entry_section): Note that if no devicetree files are provided (with '-a of-list' as above) then no nodes will be generated.
- The 'fit,compatible' property is replaced with the compatible string from - the root node of the devicetree, so that things work correctly with FIT's - configuration-matching algortihm. + The 'fit,compatible' property (if present) is replaced with the compatible + string from the root node of the devicetree, so that things work correctly + with FIT's configuration-matching algortihm. + + Dealing with phases + ~~~~~~~~~~~~~~~~~~~ + + FIT can be used to load firmware. In this case it may be necessary to run + the devicetree for each model through fdtgrep to remove unwanted properties. + The 'fit,fdt-phase' property can be provided to indicate the phase for which + the devicetree is intended. + + For example this indicates that the FDT should be processed for VPL:: + + images { + @fdt-SEQ { + description = "fdt-NAME"; + type = "flat_dt"; + compression = "none"; + fit,fdt-phase = "vpl"; + }; + }; + + Using this mechanism, it is possible to generate a FIT which can provide VPL + images for multiple models, with TPL selecting the correct model to use. The + same approach can of course be used for SPL images. + + Note that the `of-spl-remove-props` entryarg can be used to indicate + additional properties to remove. It is often used to remove properties like + `clock-names` and `pinctrl-names` which are not needed in SPL builds. + + See :ref:`fdtgrep_filter` for more information.
Generating nodes from an ELF file (split-elf) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -368,8 +397,14 @@ class Entry_fit(Entry_section): self._fdts = None self._fdt_dir = None self.mkimage = None + self.fdtgrep = None self._priv_entries = {} self._loadables = [] + self._remove_props = [] + props, = self.GetEntryArgsOrProps( + [EntryArg('of-spl-remove-props', str)], required=False) + if props: + self._remove_props = props.split()
def ReadNode(self): super().ReadNode() @@ -505,6 +540,19 @@ class Entry_fit(Entry_section): rel_path = node.path[len(self._node.path) + 1:] self.Raise(f"subnode '{rel_path}': {msg}")
+ def _run_fdtgrep(self, infile, phase, outfile): + """Run fdtgrep to create the dtb for a phase + + Args: + infile (str): Input filename containing the full FDT contents (with + all nodes and properties) + phase (str): Phase to generate for ('tpl', 'vpl', 'spl') + outfile (str): Output filename to write the grepped FDT contents to + (with only neceesary nodes and properties) + """ + return self.fdtgrep.create_for_phase(infile, phase, outfile, + self._remove_props) + def _build_input(self): """Finish the FIT by adding the 'data' properties to it
@@ -606,6 +654,7 @@ class Entry_fit(Entry_section): for seq, fdt_fname in enumerate(self._fdts): node_name = node.name[1:].replace('SEQ', str(seq + 1)) fname = tools.get_input_filename(fdt_fname + '.dtb') + fdt_phase = None with fsw.add_node(node_name): for pname, prop in node.props.items(): if pname == 'fit,firmware': @@ -623,6 +672,8 @@ class Entry_fit(Entry_section): fdt.Scan() prop = fdt.GetRoot().props['compatible'] fsw.property('compatible', prop.bytes) + elif pname == 'fit,fdt-phase': + fdt_phase = fdt_util.GetString(node, pname) elif pname.startswith('fit,'): self._raise_subnode( node, f"Unknown directive '{pname}'") @@ -635,7 +686,14 @@ class Entry_fit(Entry_section):
# Add data for 'images' nodes (but not 'config') if depth == 1 and in_images: - fsw.property('data', tools.read_file(fname)) + if fdt_phase: + phase_fname = tools.get_output_filename( + f'{fdt_fname}-{fdt_phase}.dtb') + self._run_fdtgrep(fname, fdt_phase, phase_fname) + data = tools.read_file(phase_fname) + else: + data = tools.read_file(fname) + fsw.property('data', data)
for subnode in node.subnodes: with fsw.add_node(subnode.name): @@ -863,6 +921,7 @@ class Entry_fit(Entry_section): def AddBintools(self, btools): super().AddBintools(btools) self.mkimage = self.AddBintool(btools, 'mkimage') + self.fdtgrep = self.AddBintool(btools, 'fdtgrep')
def CheckMissing(self, missing_list): # We must use our private entry list for this since generator nodes diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index d930e353faf..93f3d22cf57 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -7655,6 +7655,41 @@ fdt fdtmap Extract the devicetree blob from the fdtmap self.assertEqual(f'u-boot,model-{expected}', fnode.props['compatible'].value)
+ def testFitFdtPhase(self): + """Test an image with an FIT with fdt-phase in the fdt nodes""" + phase = 'tpl' + entry_args = { + f'{phase}-dtb': '1', + f'{phase}-bss-pad': 'y', + 'of-spl-remove-props': 'prop-to-remove another-prop-to-get-rid-of', + 'of-list': 'model1 model2', + 'default-dt': 'model2', + } + testdir, dtb_list = self.SetupAlternateDts() + data = self._DoReadFileDtb( + '335_fit_fdt_phase.dts', use_real_dtb=True, update_dtb=True, + entry_args=entry_args, extra_indirs=[testdir])[0] + fit_data = data[len(U_BOOT_DATA):-len(U_BOOT_NODTB_DATA)] + fit = fdt.Fdt.FromData(fit_data) + fit.Scan() + + # Check that each FDT has only the expected properties for the phase + for seq in range(1, 2): + fnode = fit.GetNode(f'/images/fdt-{seq}') + self.assertIsNotNone(fnode) + dtb = fdt.Fdt.FromData(fnode.props['data'].bytes) + dtb.Scan() + + # Make sure that the 'bootph-pre-sram' tag in /node protects it from + # removal + node = dtb.GetNode('/node') + self.assertIsNotNone(node) + self.assertEqual({'some-prop', 'not-a-prop-to-remove'}, + node.props.keys()) + + # Make sure the other node is gone + self.assertIsNone(dtb.GetNode('/node/other-node')) +
if __name__ == "__main__": unittest.main() diff --git a/tools/binman/main.py b/tools/binman/main.py index 92d2431aea7..dc817ddcd42 100755 --- a/tools/binman/main.py +++ b/tools/binman/main.py @@ -122,6 +122,8 @@ def RunBinman(args): ret_code = RunTests(args.debug, args.verbosity, args.processes, args.test_preserve_dirs, args.tests, args.toolpath) + if args.debug and not test_util.use_concurrent: + print('Tests can run in parallel: pip install concurrencytest')
elif args.cmd == 'bintool-docs': control.write_bintool_docs(bintool.Bintool.get_tool_list()) diff --git a/tools/binman/test/335_fit_fdt_phase.dts b/tools/binman/test/335_fit_fdt_phase.dts new file mode 100644 index 00000000000..f8d0740a394 --- /dev/null +++ b/tools/binman/test/335_fit_fdt_phase.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot { + }; + fit { + description = "test-desc"; + #address-cells = <1>; + fit,fdt-list = "of-list"; + + images { + kernel { + description = "Vanilla Linux kernel"; + type = "kernel"; + arch = "ppc"; + os = "linux"; + compression = "gzip"; + load = <00000000>; + entry = <00000000>; + hash-1 { + algo = "crc32"; + }; + hash-2 { + algo = "sha1"; + }; + u-boot { + }; + }; + @fdt-SEQ { + description = "fdt-NAME.dtb"; + type = "flat_dt"; + compression = "none"; + fit,fdt-phase = "tpl"; + hash { + algo = "sha256"; + }; + }; + }; + + configurations { + default = "@config-DEFAULT-SEQ"; + @config-SEQ { + description = "conf-NAME.dtb"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt-SEQ"; + fit,firmware = "tpl"; + fit,compatible; + }; + }; + }; + u-boot-nodtb { + }; + }; +};