Dear Fabio Giovagnini,
In message 201002061124.41572.fabio.giovagnini@aurion-tech.com you wrote:
I can compile u-boot for rsk7203_config. But into the file board/renesas/rsk7203/config.mk
TEXT_BASE = 0x0C7C0000
and if I read u-boot.srec that is the result of building process I see that the address spce of the code is starting from 0x0C7C0000
On my board I have 32 bit SDRAM at such an address, and even if I could
In this case your board is obviously not a Renesas rsk7203 board, which means you cannot use this configuration foir your hardware.
uxecute the program using an emulator initializing in place of me the BSC, how can I flash at 0x00000000 (start address of NOR flash) my bootloader? How can I link the loader so that I can flash the code into my NOR flash and using a part of SDRAM I have to run the bootloader?
You will have to port U-Boot to your hardware.
Best regards,
Wolfgang Denk