Hi Peng!
On 14.10.24 08:29, Peng Fan wrote:
Hi Heiko,
With the two applied, with latest U-Boot, uuu works well on i.MX8MP-EVK https://lore.kernel.org/all/20241012093410.9069-1-peng.fan@oss.nxp.com/ https://lore.kernel.org/all/20241011105827.7729-1-peng.fan@oss.nxp.com/
Thanks for verifying! So the problem is for sure on my side...
My base is: * f919c3a889 - (tag: v2024.10) Prepare v2024.10 (vor 7 Tagen) <Tom Rini>
So, your patches not applied ... yet.
Yes some patches above to introduce board support, mainlining comes soon...
I tried with your patches, still teh same problem on my side.
Would you share your commit hash and boot log?
see below ... I must admit I have enabled IMX_HAB boot, and signing works well with binman... may I ask, if you can enable IMX_HAB too?
here the bootlog:
│ │ <> U-Boot SPL 2024.10-00017-gdf824fb3d8ef-dirty (Oct 07 2024 - 14:54:35 +0000) │ │ <> DDR: 4096 MiB [0x2] │ │ <> DDR: Inline ECC disabled │ │ <> SEC0: RNG instantiated │ │ <> Normal Boot │ │ <> WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) │ │ <> Trying to boot from BOOTROM │ │ <> Boot Stage: USB boot │ │ <> Find img info 0x48021000, size 1493611 │ │ <> Need continue download 1492992 │ │ <> hab fuse not enabled │ │ <> │ │ <> Authenticate image from DDR location 0x44000000... │ │ <> NOTICE: Do not release JR0 to NS as it can be used by HAB │ │ <> NOTICE: BL31: v2.11.0(release):v2.10.0-984-gf2735ebcc │ │ <> NOTICE: BL31: Built : 11:51:22, May 23 2024 │ │ <> │ │ <> │ │ <> U-Boot 2024.10-00017-gdf824fb3d8ef-dirty (Oct 07 2024 - 14:54:35 +0000) │ │ <> │ │ <> CPU: Freescale i.MX8MP[8] rev1.1 1800 MHz (running at 1200 MHz) │ │ <> CPU: Commercial temperature grade (0C to 95C) at 41C │ │ <> Reset cause: POR │ │ <> Model: Aristainetos3 ADLink PI SMARC carrier │ │ <> DRAM: 4 GiB │ │ <> Core: 172 devices, 36 uclasses, devicetree: separate │ │ <> WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) │ │ <> FSL_SDHC: 1, FSL_SDHC: 0 │ │ <> Loading Environment from MMC... Reading from MMC(0)... OK │ │ <> In: serial │ │ <> Out: serial │ │ <> Err: serial │ │ <> SEC0: RNG instantiated │ │ <> Net: │ │ <> Warning: ethernet@30bf0000 (eth0) using random MAC address - 9a:16:44:b4:19:9f │ │ <> │ │ <> Warning: ethernet@30be0000 (eth1) using random MAC address - 96:f4:de:9a:49:8f │ │ <> eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] │ │ <> Hit any key to stop autoboot: 0 │ │ <> u-boot=>
bye, Heiko
Regards, Peng.
Subject: [RFC PATCH v1] dts: imx8mp-u-boot.dtsi align flash.bin
trying to load current flash.bin with uuu tool leads in not booting U- Boot as missing some bytes.
Align flash.bin in this case to 0x800 bytes, to make uuu and ROM api happy.
Signed-off-by: Heiko Schocher hs@denx.de
I am unsure about the value of 0x800 which is twice the value the code in spl_romapi_load_image_stream(), requests from romapi which in my case on imx8mp is 0x400...
May I oversee something?
arch/arm/dts/imx8mp-u-boot.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp- u-boot.dtsi index 56749ccacd..3c0bf8c4d6 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -85,6 +85,7 @@ filename = "flash.bin"; section { pad-byte = <0x00>;
align-size = <0x800>;#ifdef CONFIG_IMX_HAB nxp-imx8mcst@0 {
-- 2.20.1