Signed-off-by: Joe Hershberger joe.hershberger@ni.com Cc: Joe Hershberger joe.hershberger@gmail.com Cc: Kim Phillips kim.phillips@freescale.com --- include/configs/MPC8349ITX.h | 328 ++++++++++++++++++++++++++---------------- 1 files changed, 204 insertions(+), 124 deletions(-)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index de233ff..c98c675 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -71,7 +71,7 @@ #define CONFIG_SYS_TEXT_BASE 0xFEF00000 #endif
-#define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ +#define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */
#define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R @@ -81,7 +81,8 @@ */
#ifdef CONFIG_MPC8349ITX -#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ +/* The CF card interface on the back of the board */ +#define CONFIG_COMPACT_FLASH #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ @@ -111,19 +112,20 @@ #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ -#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ +#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F
/* Don't probe these addresses: */ -#define CONFIG_SYS_I2C_NOPROBES {{1, CONFIG_SYS_I2C_8574_ADDR1}, \ +#define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ {1, CONFIG_SYS_I2C_8574_ADDR2}, \ {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ - {1, CONFIG_SYS_I2C_8574A_ADDR2}} + {1, CONFIG_SYS_I2C_8574A_ADDR2} } /* Bit definitions for the 8574[A] I2C expander */ -#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ + /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ +#define I2C_8574_REVISION 0x03 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ @@ -146,7 +148,8 @@ #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 #define CONFIG_SYS_ATA_STRIDE 2
-#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ +/* If a CF card is not inserted, time out quickly */ +#define ATA_RESET_TIME 1
#endif
@@ -183,15 +186,15 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE #define CONFIG_SYS_83XX_DDR_USES_CS0 -#define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x2000
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ + | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) @@ -200,9 +203,12 @@ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif
-#ifndef CONFIG_SPD_EEPROM /* No SPD? Then manually set up DDR parameters */ - #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ - #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) +/* No SPD? Then manually set up DDR parameters */ +#ifndef CONFIG_SPD_EEPROM + #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ + #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \ + | CSCONFIG_ROW_BIT_13 \ + | CSCONFIG_COL_BIT_10)
#define CONFIG_SYS_DDR_TIMING_1 0x26242321 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ @@ -212,11 +218,12 @@ *Flash on the Local Bus */
-#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_MAX_FLASH_SECT 135 /* 127 64KB sectors + 8 8KB sectors per device */ +/* 127 64KB sectors + 8 8KB sectors per device */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT @@ -224,11 +231,12 @@ /* The ITX has two flash chips, but the ITX-GP has only one. To support both boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} -#define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ -#define CONFIG_SYS_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST \ + {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} +#define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ +#define CONFIG_SYS_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
/* Vitesse 7385 */
@@ -248,12 +256,19 @@ boards, we say we have two, but don't display a message if we find only one. */
/* Flash */
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ - OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ + | OR_UPM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD) #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT)) +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN \ + | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
/* Vitesse 7385 */
@@ -261,10 +276,15 @@ boards, we say we have two, but don't display a message if we find only one. */
#ifdef CONFIG_VSC7385_ENET
-#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ - OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ - OR_GPCM_EHTR | OR_GPCM_EAD) +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_SETA \ + | OR_GPCM_TRLX \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD)
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) @@ -273,20 +293,28 @@ boards, we say we have two, but don't display a message if we find only one. */
/* LED */
-#define CONFIG_SYS_LED_BASE 0xF9000000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \ - OR_GPCM_EHTR | OR_GPCM_EAD) +#define CONFIG_SYS_LED_BASE 0xF9000000 +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD)
/* Compact Flash */
#ifdef CONFIG_COMPACT_FLASH
-#define CONFIG_SYS_CF_BASE 0xF0000000 +#define CONFIG_SYS_CF_BASE 0xF0000000
-#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ + | BR_PS_16 \ + | BR_MS_UPMA \ + | BR_V) +#define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI)
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) @@ -305,15 +333,16 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif
#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* * Local Bus LCRR and LBCR regs @@ -325,8 +354,10 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000
-#define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ + /* LB sdram refresh timer, about 6us */ +#define CONFIG_SYS_LBC_LSRT 0x32000000 + /* LB refresh timer prescal, 266MHz/32*/ +#define CONFIG_SYS_LBC_MRTPR 0x20000000
/* * Serial Port @@ -338,7 +369,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200 @@ -365,23 +396,27 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) +#define CONFIG_SYS_PCI1_MMIO_BASE \ + (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */
#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_PCI2_MEM_BASE (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) +#define CONFIG_SYS_PCI2_MEM_BASE \ + (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_MMIO_BASE (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) +#define CONFIG_SYS_PCI2_MMIO_BASE \ + (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) -#define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ +#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI2_IO_PHYS \ + (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) +#define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif
#define CONFIG_NET_MULTI @@ -444,15 +479,16 @@ boards, we say we have two, but don't display a message if we find only one. */
#ifndef CONFIG_SYS_RAMBOOT #define CONFIG_ENV_IS_IN_FLASH - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + #define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ - #define CONFIG_ENV_SIZE 0x2000 + #define CONFIG_ENV_SIZE 0x2000 #else - #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ + #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ #undef CONFIG_FLASH_CFI_DRIVER #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) + #define CONFIG_ENV_SIZE 0x2000 #endif
#define CONFIG_LOADS_ECHO /* echo on for serial download */ @@ -481,30 +517,30 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_SDRAM
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ - || defined(CONFIG_USB_STORAGE) - #define CONFIG_DOS_PARTITION - #define CONFIG_CMD_FAT - #define CONFIG_SUPPORT_VFAT + || defined(CONFIG_USB_STORAGE) + #define CONFIG_DOS_PARTITION + #define CONFIG_CMD_FAT + #define CONFIG_SUPPORT_VFAT #endif
#ifdef CONFIG_COMPACT_FLASH - #define CONFIG_CMD_IDE + #define CONFIG_CMD_IDE #endif
#ifdef CONFIG_SATA_SIL3114 - #define CONFIG_CMD_SATA + #define CONFIG_CMD_SATA #endif
#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) - #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_EXT2 #endif
#ifdef CONFIG_PCI - #define CONFIG_CMD_PCI + #define CONFIG_CMD_PCI #endif
#ifdef CONFIG_HARD_I2C - #define CONFIG_CMD_I2C + #define CONFIG_CMD_I2C #endif
/* Watchdog */ @@ -513,38 +549,41 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
#ifdef CONFIG_MPC8349ITX -#define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ #else -#define CONFIG_SYS_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ #endif
#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + /* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + /* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ + /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
#define CONFIG_SYS_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ @@ -565,7 +604,7 @@ boards, we say we have two, but don't display a message if we find only one. */ HRCWH_SW_WATCHDOG_DISABLE |\ HRCWH_ROM_LOC_LOCAL_16BIT |\ HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII ) + HRCWH_TSEC2M_IN_GMII) #else #define CONFIG_SYS_HRCW_HIGH (\ HRCWH_PCI_HOST |\ @@ -578,14 +617,14 @@ boards, we say we have two, but don't display a message if we find only one. */ HRCWH_SW_WATCHDOG_DISABLE |\ HRCWH_ROM_LOC_LOCAL_16BIT |\ HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII ) + HRCWH_TSEC2M_IN_GMII) #endif
/* * System performance */ #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ @@ -596,8 +635,10 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * System IO Config */ -#define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ -#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */ +/* Needed for gigabit to work on TSEC 1 */ +#define CONFIG_SYS_SICRH SICRH_TSOBI1 + /* USB DR as device + USB MPH as host */ +#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
#define CONFIG_SYS_HID0_INIT 0x00000000 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE @@ -606,15 +647,31 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ + | BATL_PP_10 \ + | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP)
/* PCI */ #ifdef CONFIG_PCI -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ + | BATL_PP_10 \ + | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ + | BATL_PP_10 \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) #else #define CONFIG_SYS_IBAT1L 0 #define CONFIG_SYS_IBAT1U 0 @@ -623,10 +680,21 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif
#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ + | BATL_PP_10 \ + | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ + | BATL_PP_10 \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) #else #define CONFIG_SYS_IBAT3L 0 #define CONFIG_SYS_IBAT3U 0 @@ -635,13 +703,24 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ + | BATL_PP_10 \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP)
/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT6L (0xF0000000 \ + | BATL_PP_10 \ + | BATL_MEMCOHERENCE \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT6U (0xF0000000 \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP)
#define CONFIG_SYS_IBAT7L 0 #define CONFIG_SYS_IBAT7U 0 @@ -674,23 +753,24 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE
-#define CONFIG_NETDEV eth0 +#define CONFIG_NETDEV "eth0"
#ifdef CONFIG_MPC8349ITX -#define CONFIG_HOSTNAME mpc8349emitx +#define CONFIG_HOSTNAME "mpc8349emitx" #else -#define CONFIG_HOSTNAME mpc8349emitxgp +#define CONFIG_HOSTNAME "mpc8349emitxgp" #endif
/* Default path and filenames */ #define CONFIG_ROOTPATH /nfsroot/rootfs #define CONFIG_BOOTFILE uImage -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + /* U-Boot image on TFTP server */ +#define CONFIG_UBOOTPATH "u-boot.bin"
#ifdef CONFIG_MPC8349ITX -#define CONFIG_FDTFILE mpc8349emitx.dtb +#define CONFIG_FDTFILE "mpc8349emitx.dtb" #else -#define CONFIG_FDTFILE mpc8349emitxgp.dtb +#define CONFIG_FDTFILE "mpc8349emitxgp.dtb" #endif
#define CONFIG_BOOTDELAY 6 @@ -700,28 +780,28 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_BOOTARGS \ "root=/dev/nfs rw" \ - " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ + " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ - MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ - MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ + MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ + CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
#define CONFIG_EXTRA_ENV_SETTINGS \ "console=" MK_STR(CONFIG_CONSOLE) "\0" \ - "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ - "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "netdev=" CONFIG_NETDEV "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ - "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ + "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\ + "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\ + "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\ + "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\ "fdtaddr=780000\0" \ - "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" + "fdtfile=" CONFIG_FDTFILE "\0"
#define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ - " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ " console=$console,$baudrate $othbootargs; " \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \