Re: [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error

14 Jun 2022

Hi,
On 6/12/22 18:12, Pali Rohár wrote:
...
PING?
Sorry for too late.
...
On Friday 29 April 2022 20:27:34 Pali Rohár wrote:
...
Only newer eSDHC controllers set PRSSTAT_SDSTB flag. So do not wait until
flag PRSSTAT_SDSTB is set on old pre-2.2 controllers. Instead sleep for
fixed amount of time like it was before commit 6f883e501b65 ("mmc:
fsl_esdhc: Add emmc hs200 support").
This change fixes error 'Internal clock never stabilised.' which is printed
on P2020 board at every access to SD card.
Fixes: 6f883e501b65 ("mmc: fsl_esdhc: Add emmc hs200 support")
Signed-off-by: Pali Rohár pali@kernel.org
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards,
Jaehoon Chung
...
...

drivers/mmc/fsl_esdhc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index fdf2cc290e06..3b3587bd8d72 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -503,6 +503,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
   u32 time_out;
   u32 value;
   uint clk;

u32 hostver;
if (clock < mmc->cfg->f_min)
clock = mmc->cfg->f_min;


@@ -543,6 +544,14 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);

/* Only newer eSDHC controllers set PRSSTAT_SDSTB flag */
hostver = esdhc_read32(&priv->esdhc_regs->hostver);
if (HOSTVER_VENDOR(hostver) <= VENDOR_V_22) {
udelay(10000);


esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);


return;


}
time_out = 20;
 value = PRSSTAT_SDSTB;
 while (!(esdhc_read32(&regs->prsstat) & value)) {

@@ -562,6 +571,7 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
   struct fsl_esdhc *regs = priv->esdhc_regs;
   u32 value;
   u32 time_out;

u32 hostver;
value = esdhc_read32(&regs->sysctl);


@@ -572,6 +582,13 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
esdhc_write32(&regs->sysctl, value);

/* Only newer eSDHC controllers set PRSSTAT_SDSTB flag */
hostver = esdhc_read32(&priv->esdhc_regs->hostver);
if (HOSTVER_VENDOR(hostver) <= VENDOR_V_22) {
udelay(10000);


return;


}
time_out = 20;
 value = PRSSTAT_SDSTB;
 while (!(esdhc_read32(&regs->prsstat) & value)) {

-- 
2.20.1

    