This change is heavily based on commit e0cc7df9fdf2 ("omap3_beagle: Update for DM SPL support"), that did the same update for the OMAP3 Beagle board.
Signed-off-by: Javier Martinez Canillas javierm@redhat.com ---
arch/arm/dts/omap3-igep0020-u-boot.dtsi | 14 ++------------ board/isee/igep00x0/igep00x0.c | 12 ------------ configs/igep00x0_defconfig | 17 ++++++++--------- 3 files changed, 10 insertions(+), 33 deletions(-)
diff --git a/arch/arm/dts/omap3-igep0020-u-boot.dtsi b/arch/arm/dts/omap3-igep0020-u-boot.dtsi index 41beaf0900c3..2c03701c896a 100644 --- a/arch/arm/dts/omap3-igep0020-u-boot.dtsi +++ b/arch/arm/dts/omap3-igep0020-u-boot.dtsi @@ -5,20 +5,10 @@ * (C) Copyright 2017 Derald D. Woods woods.technical@gmail.com */
+#include "omap3-u-boot.dtsi" + / { chosen { stdout-path = &uart3; }; }; - -&uart1 { - reg-shift = <2>; -}; - -&uart2 { - reg-shift = <2>; -}; - -&uart3 { - reg-shift = <2>; -}; diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 8a3f290f678f..a35a7cd3b1f7 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -29,18 +29,6 @@ #include <fdt_support.h> #include "igep00x0.h"
-static const struct ns16550_plat igep_serial = { - .base = OMAP34XX_UART3, - .reg_shift = 2, - .clock = V_NS16550_CLK, - .fcr = UART_FCR_DEFVAL, -}; - -U_BOOT_DRVINFO(igep_uart) = { - "ns16550_serial", - &igep_serial -}; - /* * Routine: get_board_revision * Description: GPIO_28 and GPIO_129 are used to read board and revision from diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index 6df6c33e25ab..c1b873a17efb 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_TI_COMMON_CMD_OPTIONS=y @@ -40,16 +42,7 @@ CONFIG_SPL_UBI_LEB_START=2048 CONFIG_SPL_UBI_INFO_ADDR=0x88080000 CONFIG_SPL_UBI_VOL_IDS=8 CONFIG_SPL_UBI_LOAD_MONITOR_ID=0 -CONFIG_SPL_UBI_LOAD_KERNEL_ID=3 -CONFIG_SPL_UBI_LOAD_ARGS_ID=4 CONFIG_SPL_ONENAND_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 -CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 -CONFIG_SPL_FALCON_BOOT_MMCSD=y -CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 -CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 -CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_CMD_SPL=y CONFIG_CMD_NAND=y CONFIG_CMD_ONENAND=y @@ -59,7 +52,11 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_MTDPARTS=y CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SPL_PARTITION_UUIDS=y CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent" CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y @@ -69,6 +66,7 @@ CONFIG_ENV_UBI_VOLUME_REDUND="config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y # CONFIG_NET is not set +CONFIG_SPL_DM=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_MMC_OMAP_HS=y @@ -81,5 +79,6 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_MTD_UBI_FASTMAP=y +CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_CONS_INDEX=3 CONFIG_BCH=y