These files are used by both SPL and main U-Boot.
Signed-off-by: Tom Warren twarren@nvidia.com --- Changes in v2: - update all new copyright header dates to 2013 - use ODMDATA correctly in query_dram_size Changes in v3: - rename T114 SKU ID - use common clock code
arch/arm/cpu/tegra-common/ap.c | 9 +- arch/arm/cpu/tegra-common/board.c | 21 +- arch/arm/cpu/tegra114-common/Makefile | 41 ++ arch/arm/cpu/tegra114-common/clock.c | 655 ++++++++++++++++++++++++++++++++ arch/arm/cpu/tegra114-common/funcmux.c | 63 +++ arch/arm/cpu/tegra114-common/pinmux.c | 506 ++++++++++++++++++++++++ 6 files changed, 1291 insertions(+), 4 deletions(-) create mode 100644 arch/arm/cpu/tegra114-common/Makefile create mode 100644 arch/arm/cpu/tegra114-common/clock.c create mode 100644 arch/arm/cpu/tegra114-common/funcmux.c create mode 100644 arch/arm/cpu/tegra114-common/pinmux.c
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c index aebe29e..236cda8 100644 --- a/arch/arm/cpu/tegra-common/ap.c +++ b/arch/arm/cpu/tegra-common/ap.c @@ -31,6 +31,7 @@ #include <asm/arch-tegra/fuse.h> #include <asm/arch-tegra/pmc.h> #include <asm/arch-tegra/scu.h> +#include <asm/arch-tegra/tegra.h> #include <asm/arch-tegra/warmboot.h>
int tegra_get_chip_type(void) @@ -42,7 +43,7 @@ int tegra_get_chip_type(void) /* * This is undocumented, Chip ID is bits 15:8 of the register * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for - * Tegra30 + * Tegra30, and 0x35 for T114. */ gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; @@ -68,6 +69,12 @@ int tegra_get_chip_type(void) return TEGRA_SOC_T30; } break; + case CHIPID_TEGRA114: + switch (tegra_sku_id) { + case SKU_ID_T114_ENG: + return TEGRA_SOC_T114; + } + break; } /* unknown sku id */ return TEGRA_SOC_UNKNOWN; diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c index 1ec6c06..08bfa64 100644 --- a/arch/arm/cpu/tegra-common/board.c +++ b/arch/arm/cpu/tegra-common/board.c @@ -37,8 +37,10 @@ enum { /* UARTs which we can enable */ UARTA = 1 << 0, UARTB = 1 << 1, + UARTC = 1 << 2, UARTD = 1 << 3, - UART_COUNT = 4, + UARTE = 1 << 4, + UART_COUNT = 5, };
/* @@ -68,7 +70,7 @@ unsigned int query_sdram_size(void) case 3: return 0x40000000; /* 1GB */ } -#else /* Tegra30 */ +#else /* Tegra30/Tegra114 */ /* bits 31:28 in OdmData are used for RAM size on T30 */ switch ((reg) >> 28) { case 0: @@ -117,12 +119,18 @@ static int uart_configs[] = { -1, FUNCMUX_UART4_GMC, -1, -#else /* Tegra30 */ +#elif defined(CONFIG_TEGRA30) FUNCMUX_UART1_ULPI, /* UARTA */ -1, -1, -1, -1, +#else /* Tegra114 */ + -1, + -1, + -1, + FUNCMUX_UART4_GMI, /* UARTD */ + -1, #endif };
@@ -138,6 +146,7 @@ static void setup_uarts(int uart_ids) PERIPH_ID_UART2, PERIPH_ID_UART3, PERIPH_ID_UART4, + PERIPH_ID_UART5, }; size_t i;
@@ -161,9 +170,15 @@ void board_init_uart_f(void) #ifdef CONFIG_TEGRA_ENABLE_UARTB uart_ids |= UARTB; #endif +#ifdef CONFIG_TEGRA_ENABLE_UARTC + uart_ids |= UARTC; +#endif #ifdef CONFIG_TEGRA_ENABLE_UARTD uart_ids |= UARTD; #endif +#ifdef CONFIG_TEGRA_ENABLE_UARTE + uart_ids |= UARTE; +#endif setup_uarts(uart_ids); }
diff --git a/arch/arm/cpu/tegra114-common/Makefile b/arch/arm/cpu/tegra114-common/Makefile new file mode 100644 index 0000000..5b53a71 --- /dev/null +++ b/arch/arm/cpu/tegra114-common/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC)-common.o + +COBJS-y += clock.o funcmux.o pinmux.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c new file mode 100644 index 0000000..9b29ce1 --- /dev/null +++ b/arch/arm/cpu/tegra114-common/clock.c @@ -0,0 +1,655 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +/* Tegra114 Clock control functions */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> +#include <div64.h> +#include <fdtdec.h> + +/* + * Clock types that we can use as a source. The Tegra114 has muxes for the + * peripheral clocks, and in most cases there are four options for the clock + * source. This gives us a clock 'type' and exploits what commonality exists + * in the device. + * + * Letters are obvious, except for T which means CLK_M, and S which means the + * clock derived from 32KHz. Beware that CLK_M (also called OSC in the + * datasheet) and PLL_M are different things. The former is the basic + * clock supplied to the SOC from an external oscillator. The latter is the + * memory clock PLL. + * + * See definitions in clock_id in the header file. + */ +enum clock_type_id { + CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ + CLOCK_TYPE_MCPA, /* and so on */ + CLOCK_TYPE_MCPT, + CLOCK_TYPE_PCM, + CLOCK_TYPE_PCMT, + CLOCK_TYPE_PCMT16, + CLOCK_TYPE_PDCT, + CLOCK_TYPE_ACPT, + CLOCK_TYPE_ASPTE, + CLOCK_TYPE_PMDACD2T, + CLOCK_TYPE_PCST, + + CLOCK_TYPE_COUNT, + CLOCK_TYPE_NONE = -1, /* invalid clock type */ +}; + +enum { + CLOCK_MAX_MUX = 8 /* number of source options for each clock */ +}; + +enum { + MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */ + MASK_BITS_31_29, + MASK_BITS_29_28, +}; + +/* + * Clock source mux for each clock type. This just converts our enum into + * a list of mux sources for use by the code. + * + * Note: + * The extra column in each clock source array is used to store the mask + * bits in its register for the source. + */ +#define CLK(x) CLOCK_ID_ ## x +static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { + { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_30}, + { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), + CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), + CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), + MASK_BITS_31_29}, + { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), + CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), + MASK_BITS_29_28} +}; + +/* + * Clock type for each peripheral clock source. We put the name in each + * record just so it is easy to match things up + */ +#define TYPE(name, type) type +static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { + /* 0x00 */ + TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM), + TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */ + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT), + + /* 0x08 */ + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16), + TYPE(PERIPHC_I2C5, CLOCK_TYPE_PCMT16), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), + TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), + + /* 0x10 */ + TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA), + + /* 0x18 */ + TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */ + TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT), + + /* 0x20 */ + TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT), + TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT), + TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16), + TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT), + + /* 0x28 */ + TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16), + TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT), + + /* 0x30 */ + TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + + /* 0x38h */ /* Jumps to reg offset 0x3B0h */ + TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA), + TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */ + TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), + TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16), + TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT), + + /* 0x40 */ + TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT), + TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT), + TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT), + TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */ + TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), + + /* 0x48 */ + TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), + TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */ + TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + + /* 0x50 */ + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), + TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */ + TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), + TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT), +}; + +/* + * This array translates a periph_id to a periphc_internal_id + * + * Not present/matched up: + * uint vi_sensor; _VI_SENSOR_0, 0x1A8 + * SPDIF - which is both 0x08 and 0x0c + * + */ +#define NONE(name) (-1) +#define OFFSET(name, value) PERIPHC_ ## name +static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { + /* Low word: 31:0 */ + NONE(CPU), + NONE(COP), + NONE(TRIGSYS), + NONE(RESERVED3), + NONE(RTC), + NONE(TMR), + PERIPHC_UART1, + PERIPHC_UART2, /* and vfir 0x68 */ + + /* 8 */ + NONE(GPIO), + PERIPHC_SDMMC2, + NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */ + PERIPHC_I2S1, + PERIPHC_I2C1, + PERIPHC_NDFLASH, + PERIPHC_SDMMC1, + PERIPHC_SDMMC4, + + /* 16 */ + NONE(RESERVED16), + PERIPHC_PWM, + PERIPHC_I2S2, + PERIPHC_EPP, + PERIPHC_VI, + PERIPHC_G2D, + NONE(USBD), + NONE(ISP), + + /* 24 */ + PERIPHC_G3D, + NONE(RESERVED25), + PERIPHC_DISP2, + PERIPHC_DISP1, + PERIPHC_HOST1X, + NONE(VCP), + PERIPHC_I2S0, + NONE(CACHE2), + + /* Middle word: 63:32 */ + NONE(MEM), + NONE(AHBDMA), + NONE(APBDMA), + NONE(RESERVED35), + NONE(RESERVED36), + NONE(STAT_MON), + NONE(RESERVED38), + NONE(RESERVED39), + + /* 40 */ + NONE(KFUSE), + NONE(SBC1), /* SBC1, 0x34, is this SPI1? */ + PERIPHC_NOR, + NONE(RESERVED43), + PERIPHC_SBC2, + NONE(RESERVED45), + PERIPHC_SBC3, + PERIPHC_I2C5, + + /* 48 */ + NONE(DSI), + PERIPHC_TVO, /* also CVE 0x40 */ + PERIPHC_MIPI, + PERIPHC_HDMI, + NONE(CSI), + PERIPHC_TVDAC, + PERIPHC_I2C2, + PERIPHC_UART3, + + /* 56 */ + NONE(RESERVED56), + PERIPHC_EMC, + NONE(USB2), + NONE(USB3), + PERIPHC_MPE, + PERIPHC_VDE, + NONE(BSEA), + NONE(BSEV), + + /* Upper word 95:64 */ + PERIPHC_SPEEDO, + PERIPHC_UART4, + PERIPHC_UART5, + PERIPHC_I2C3, + PERIPHC_SBC4, + PERIPHC_SDMMC3, + NONE(PCIE), + PERIPHC_OWR, + + /* 72 */ + NONE(AFI), + PERIPHC_CSITE, + NONE(PCIEXCLK), + NONE(AVPUCQ), + NONE(RESERVED76), + NONE(RESERVED77), + NONE(RESERVED78), + NONE(DTV), + + /* 80 */ + PERIPHC_NANDSPEED, + PERIPHC_I2CSLOW, + NONE(DSIB), + NONE(RESERVED83), + NONE(IRAMA), + NONE(IRAMB), + NONE(IRAMC), + NONE(IRAMD), + + /* 88 */ + NONE(CRAM2), + NONE(RESERVED89), + NONE(MDOUBLER), + NONE(RESERVED91), + NONE(SUSOUT), + NONE(RESERVED93), + NONE(RESERVED94), + NONE(RESERVED95), + + /* V word: 31:0 */ + NONE(CPUG), + NONE(CPULP), + PERIPHC_G3D2, + PERIPHC_MSELECT, + PERIPHC_TSENSOR, + PERIPHC_I2S3, + PERIPHC_I2S4, + PERIPHC_I2C4, + + /* 08 */ + PERIPHC_SBC5, + PERIPHC_SBC6, + PERIPHC_AUDIO, + NONE(APBIF), + PERIPHC_DAM0, + PERIPHC_DAM1, + PERIPHC_DAM2, + PERIPHC_HDA2CODEC2X, + + /* 16 */ + NONE(ATOMICS), + NONE(RESERVED17), + NONE(RESERVED18), + NONE(RESERVED19), + NONE(RESERVED20), + NONE(RESERVED21), + NONE(RESERVED22), + PERIPHC_ACTMON, + + /* 24 */ + NONE(RESERVED24), + NONE(RESERVED25), + NONE(RESERVED26), + NONE(RESERVED27), + PERIPHC_SATA, + PERIPHC_HDA, + NONE(RESERVED30), + NONE(RESERVED31), + + /* W word: 31:0 */ + NONE(HDA2HDMICODEC), + NONE(RESERVED1_SATACOLD), + NONE(RESERVED2_PCIERX0), + NONE(RESERVED3_PCIERX1), + NONE(RESERVED4_PCIERX2), + NONE(RESERVED5_PCIERX3), + NONE(RESERVED6_PCIERX4), + NONE(RESERVED7_PCIERX5), + + /* 40 */ + NONE(CEC), + NONE(PCIE2_IOBIST), + NONE(EMC_IOBIST), + NONE(HDMI_IOBIST), + NONE(SATA_IOBIST), + NONE(MIPI_IOBIST), + NONE(EMC1_IOBIST), + NONE(XUSB), + + /* 48 */ + NONE(CILAB), + NONE(CILCD), + NONE(CILE), + NONE(DSIA_LP), + NONE(DSIB_LP), + NONE(RESERVED21_ENTROPY), + NONE(RESERVED22_W), + NONE(RESERVED23_W), + + /* 56 */ + NONE(RESERVED24_W), + NONE(AMX0), + NONE(ADX0), + NONE(DVFS), + NONE(XUSB_SS), + NONE(EMC_DLL), + NONE(MC1), + NONE(EMC1), +}; + +/* + * Get the oscillator frequency, from the corresponding hardware configuration + * field. Note that T30/T114 support 3 new higher freqs, but we map back + * to the old T20 freqs. Support for the higher oscillators is TBD. + */ +enum clock_osc_freq clock_get_osc_freq(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + reg = readl(&clkrst->crc_osc_ctrl); + reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; + + if (reg & 1) /* one of the newer freqs */ + printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg); + + return reg >> 2; /* Map to most common (T20) freqs */ +} + +/* Returns a pointer to the clock source register for a peripheral */ +u32 *get_periph_source_reg(enum periph_id periph_id) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + enum periphc_internal_id internal_id; + + /* Coresight is a special case */ + if (periph_id == PERIPH_ID_CSI) + return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; + + assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); + internal_id = periph_id_to_internal_id[periph_id]; + assert(internal_id != -1); + if (internal_id >= PERIPHC_VW_FIRST) { + internal_id -= PERIPHC_VW_FIRST; + return &clkrst->crc_clk_src_vw[internal_id]; + } else + return &clkrst->crc_clk_src[internal_id]; +} + +/** + * Given a peripheral ID and the required source clock, this returns which + * value should be programmed into the source mux for that peripheral. + * + * There is special code here to handle the one source type with 5 sources. + * + * @param periph_id peripheral to start + * @param source PLL id of required parent clock + * @param mux_bits Set to number of bits in mux register: 2 or 4 + * @param divider_bits Set to number of divider bits (8 or 16) + * @return mux value (0-4, or -1 if not found) + */ +int get_periph_clock_source(enum periph_id periph_id, + enum clock_id parent, int *mux_bits, int *divider_bits) +{ + enum clock_type_id type; + enum periphc_internal_id internal_id; + int mux; + + assert(clock_periph_id_isvalid(periph_id)); + + internal_id = periph_id_to_internal_id[periph_id]; + assert(periphc_internal_id_isvalid(internal_id)); + + type = clock_periph_type[internal_id]; + assert(clock_type_id_isvalid(type)); + + *mux_bits = clock_source[type][CLOCK_MAX_MUX]; + + if (type == CLOCK_TYPE_PCMT16) + *divider_bits = 16; + else + *divider_bits = 8; + + for (mux = 0; mux < CLOCK_MAX_MUX; mux++) + if (clock_source[type][mux] == parent) + return mux; + + /* if we get here, either us or the caller has made a mistake */ + printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, + parent); + return -1; +} + +void clock_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *clk; + u32 reg; + + /* Enable/disable the clock to this peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) + clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; + else + clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; + reg = readl(clk); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, clk); +} + +void reset_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *reset; + u32 reg; + + /* Enable/disable reset to the peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + if (periph_id < PERIPH_ID_VW_FIRST) + reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; + else + reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; + reg = readl(reset); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, reset); +} + +#ifdef CONFIG_OF_CONTROL +/* + * Convert a device tree clock ID to our peripheral ID. They are mostly + * the same but we are very cautious so we check that a valid clock ID is + * provided. + * + * @param clk_id Clock ID according to tegra114 device tree binding + * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + */ +enum periph_id clk_id_to_periph_id(int clk_id) +{ + if (clk_id > PERIPH_ID_COUNT) + return PERIPH_ID_NONE; + + switch (clk_id) { + case PERIPH_ID_RESERVED3: + case PERIPH_ID_RESERVED16: + case PERIPH_ID_RESERVED24: + case PERIPH_ID_RESERVED35: + case PERIPH_ID_RESERVED43: + case PERIPH_ID_RESERVED45: + case PERIPH_ID_RESERVED56: + case PERIPH_ID_RESERVED76: + case PERIPH_ID_RESERVED77: + case PERIPH_ID_RESERVED78: + case PERIPH_ID_RESERVED83: + case PERIPH_ID_RESERVED89: + case PERIPH_ID_RESERVED91: + case PERIPH_ID_RESERVED93: + case PERIPH_ID_RESERVED94: + case PERIPH_ID_RESERVED95: + return PERIPH_ID_NONE; + default: + return clk_id; + } +} +#endif /* CONFIG_OF_CONTROL */ + +void clock_early_init(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + + /* + * PLLP output frequency set to 408Mhz + * PLLC output frequency set to 600Mhz + * PLLD output frequency set to 925Mhz + */ + switch (clock_get_osc_freq()) { + case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ + clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8); + clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); + break; + + case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ + clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8); + clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); + break; + + case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ + clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8); + clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); + clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); + break; + case CLOCK_OSC_FREQ_19_2: + default: + /* + * These are not supported. It is too early to print a + * message and the UART likely won't work anyway due to the + * oscillator being wrong. + */ + break; + } + + /* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */ + writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]); + + /* PLLC_MISC: Set LOCK_ENABLE */ + writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc); + udelay(2); + + /* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */ + writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); + udelay(2); +} diff --git a/arch/arm/cpu/tegra114-common/funcmux.c b/arch/arm/cpu/tegra114-common/funcmux.c new file mode 100644 index 0000000..5af7550 --- /dev/null +++ b/arch/arm/cpu/tegra114-common/funcmux.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +/* Tegra114 high-level function multiplexing */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> + +int funcmux_select(enum periph_id id, int config) +{ + int bad_config = config != FUNCMUX_DEFAULT; + + switch (id) { + case PERIPH_ID_UART4: + switch (config) { + case FUNCMUX_UART4_GMI: + pinmux_set_func(PINGRP_GMI_A16, PMUX_FUNC_UARTD); + pinmux_set_func(PINGRP_GMI_A17, PMUX_FUNC_UARTD); + pinmux_set_func(PINGRP_GMI_A18, PMUX_FUNC_UARTD); + pinmux_set_func(PINGRP_GMI_A19, PMUX_FUNC_UARTD); + + pinmux_set_io(PINGRP_GMI_A16, PMUX_PIN_OUTPUT); + pinmux_set_io(PINGRP_GMI_A17, PMUX_PIN_INPUT); + pinmux_set_io(PINGRP_GMI_A18, PMUX_PIN_INPUT); + pinmux_set_io(PINGRP_GMI_A19, PMUX_PIN_OUTPUT); + + pinmux_tristate_disable(PINGRP_GMI_A16); + pinmux_tristate_disable(PINGRP_GMI_A17); + pinmux_tristate_disable(PINGRP_GMI_A18); + pinmux_tristate_disable(PINGRP_GMI_A19); + break; + } + break; + + /* Add other periph IDs here as needed */ + + default: + debug("%s: invalid periph_id %d", __func__, id); + return -1; + } + + if (bad_config) { + debug("%s: invalid config %d for periph_id %d", __func__, + config, id); + return -1; + } + return 0; +} diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c new file mode 100644 index 0000000..52b3ec4 --- /dev/null +++ b/arch/arm/cpu/tegra114-common/pinmux.c @@ -0,0 +1,506 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +/* Tegra114 pin multiplexing functions */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/tegra.h> +#include <asm/arch/pinmux.h> + +struct tegra_pingroup_desc { + const char *name; + enum pmux_func funcs[4]; + enum pmux_func func_safe; + enum pmux_vddio vddio; + enum pmux_pin_io io; +}; + +#define PMUX_MUXCTL_SHIFT 0 +#define PMUX_PULL_SHIFT 2 +#define PMUX_TRISTATE_SHIFT 4 +#define PMUX_TRISTATE_MASK (1 << PMUX_TRISTATE_SHIFT) +#define PMUX_IO_SHIFT 5 +#define PMUX_OD_SHIFT 6 +#define PMUX_LOCK_SHIFT 7 +#define PMUX_IO_RESET_SHIFT 8 + +/* Convenient macro for defining pin group properties */ +#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \ + { \ + .vddio = PMUX_VDDIO_ ## vdd, \ + .funcs = { \ + PMUX_FUNC_ ## f0, \ + PMUX_FUNC_ ## f1, \ + PMUX_FUNC_ ## f2, \ + PMUX_FUNC_ ## f3, \ + }, \ + .func_safe = PMUX_FUNC_RSVD1, \ + .io = PMUX_PIN_ ## iod, \ + } + +/* Input and output pins */ +#define PINI(pg_name, vdd, f0, f1, f2, f3) \ + PIN(pg_name, vdd, f0, f1, f2, f3, INPUT) +#define PINO(pg_name, vdd, f0, f1, f2, f3) \ + PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT) + +const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { + /* NAME VDD f0 f1 f2 f3 */ + PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA1, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA2, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA3, BB, SPI3, HSI, UARTA, ULPI), + PINI(ULPI_DATA4, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_DATA5, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_DATA6, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_DATA7, BB, SPI2, HSI, UARTA, ULPI), + PINI(ULPI_CLK, BB, SPI1, SPI5, UARTD, ULPI), + PINI(ULPI_DIR, BB, SPI1, SPI5, UARTD, ULPI), + PINI(ULPI_NXT, BB, SPI1, SPI5, UARTD, ULPI), + PINI(ULPI_STP, BB, SPI1, SPI5, UARTD, ULPI), + PINI(DAP3_FS, BB, I2S2, SPI5, DISPA, DISPB), + PINI(DAP3_DIN, BB, I2S2, SPI5, DISPA, DISPB), + PINI(DAP3_DOUT, BB, I2S2, SPI5, DISPA, DISPB), + PINI(DAP3_SCLK, BB, I2S2, SPI5, DISPA, DISPB), + PINI(GPIO_PV0, BB, USB, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PV1, BB, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SDMMC1_CLK, SDMMC1, SDMMC1, CLK12, RSVD3, RSVD4), + PINI(SDMMC1_CMD, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA), + PINI(SDMMC1_DAT3, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA), + PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA), + PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA), + PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA), + PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4), + PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4), + PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4), + PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4), + PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4), + PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4), + PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4), + PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4), + PINI(UART2_CTS_N, UART, UARTA, UARTB, RSVD3, SPI4), + PINI(UART3_TXD, UART, UARTC, RSVD2, RSVD3, SPI4), + PINI(UART3_RXD, UART, UARTC, RSVD2, RSVD3, SPI4), + PINI(UART3_CTS_N, UART, UARTC, SDMMC1, DTV, SPI4), + PINI(UART3_RTS_N, UART, UARTC, PWM0, DTV, DISPA), + PINI(GPIO_PU0, UART, OWR, UARTA, RSVD3, RSVD4), + PINI(GPIO_PU1, UART, RSVD1, UARTA, RSVD3, RSVD4), + PINI(GPIO_PU2, UART, RSVD1, UARTA, RSVD3, RSVD4), + PINI(GPIO_PU3, UART, PWM0, UARTA, DISPA, DISPB), + PINI(GPIO_PU4, UART, PWM1, UARTA, DISPA, DISPB), + PINI(GPIO_PU5, UART, PWM2, UARTA, DISPA, DISPB), + PINI(GPIO_PU6, UART, PWM3, UARTA, USB, DISPB), + PINI(GEN1_I2C_SDA, UART, I2C1, RSVD2, RSVD3, RSVD4), + PINI(GEN1_I2C_SCL, UART, I2C1, RSVD2, RSVD3, RSVD4), + PINI(DAP4_FS, UART, I2S3, RSVD2, DTV, RSVD4), + PINI(DAP4_DIN, UART, I2S3, RSVD2, RSVD3, RSVD4), + PINI(DAP4_DOUT, UART, I2S3, RSVD2, DTV, RSVD4), + PINI(DAP4_SCLK, UART, I2S3, RSVD2, RSVD3, RSVD4), + PINI(CLK3_OUT, UART, EXTPERIPH3, RSVD2, RSVD3, RSVD4), + PINI(CLK3_REQ, UART, DEV3, RSVD2, RSVD3, RSVD4), + PINI(GMI_WP_N, GMI, RSVD1, NAND, GMI, GMI_ALT), + PINI(GMI_IORDY, GMI, SDMMC2, RSVD2, GMI, TRACE), + PINI(GMI_WAIT, GMI, SPI4, NAND, GMI, DTV), + PINI(GMI_ADV_N, GMI, RSVD1, NAND, GMI, TRACE), + PINI(GMI_CLK, GMI, SDMMC2, NAND, GMI, TRACE), + PINI(GMI_CS0_N, GMI, RSVD1, NAND, GMI, USB), + PINI(GMI_CS1_N, GMI, RSVD1, NAND, GMI, SOC), + PINI(GMI_CS2_N, GMI, SDMMC2, NAND, GMI, TRACE), + PINI(GMI_CS3_N, GMI, SDMMC2, NAND, GMI, GMI_ALT), + PINI(GMI_CS4_N, GMI, USB, NAND, GMI, TRACE), + PINI(GMI_CS6_N, GMI, NAND, NAND_ALT, GMI, SPI4), + PINI(GMI_CS7_N, GMI, NAND, NAND_ALT, GMI, SDMMC2), + PINI(GMI_AD0, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD1, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD2, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD3, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD4, GMI, RSVD1, NAND, GMI, RSVD4), + PINI(GMI_AD5, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_AD6, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_AD7, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_AD8, GMI, PWM0, NAND, GMI, DTV), + PINI(GMI_AD9, GMI, PWM1, NAND, GMI, CLDVFS), + PINI(GMI_AD10, GMI, PWM2, NAND, GMI, CLDVFS), + PINI(GMI_AD11, GMI, PWM3, NAND, GMI, USB), + PINI(GMI_AD12, GMI, SDMMC2, NAND, GMI, RSVD4), + PINI(GMI_AD13, GMI, SDMMC2, NAND, GMI, RSVD4), + PINI(GMI_AD14, GMI, SDMMC2, NAND, GMI, DTV), + PINI(GMI_AD15, GMI, SDMMC2, NAND, GMI, DTV), + PINI(GMI_A16, GMI, UARTD, TRACE, GMI, GMI_ALT), + PINI(GMI_A17, GMI, UARTD, RSVD2, GMI, TRACE), + PINI(GMI_A18, GMI, UARTD, RSVD2, GMI, TRACE), + PINI(GMI_A19, GMI, UARTD, SPI4, GMI, TRACE), + PINI(GMI_WR_N, GMI, RSVD1, NAND, GMI, SPI4), + PINI(GMI_OE_N, GMI, RSVD1, NAND, GMI, SOC), + PINI(GMI_DQS, GMI, SDMMC2, NAND, GMI, TRACE), + PINI(GMI_RST_N, GMI, NAND, NAND_ALT, GMI, RSVD4), + PINI(GEN2_I2C_SCL, GMI, I2C2, RSVD2, GMI, RSVD4), + PINI(GEN2_I2C_SDA, GMI, I2C2, RSVD2, GMI, RSVD4), + PINI(SDMMC4_CLK, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), + PINI(SDMMC4_CMD, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), + PINI(SDMMC4_DAT0, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT1, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT2, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT3, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT4, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), + PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), + PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4), + PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4), + PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3), + PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4), + PINI(CAM_I2C_SDA, CAM, VGP2, I2C3, RSVD3, RSVD4), + PINI(GPIO_PBB3, CAM, VGP3, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB4, CAM, VGP4, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB5, CAM, VGP5, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB6, CAM, VGP6, DISPA, DISPB, RSVD4), + PINI(GPIO_PBB7, CAM, I2S4, RSVD2, RSVD3, RSVD4), + PINI(GPIO_PCC2, CAM, I2S4, RSVD2, RSVD3, RSVD4), + PINI(JTAG_RTCK, SYS, RTCK, RSVD2, RSVD3, RSVD4), + PINI(PWR_I2C_SCL, SYS, I2CPWR, RSVD2, RSVD3, RSVD4), + PINI(PWR_I2C_SDA, SYS, I2CPWR, RSVD2, RSVD3, RSVD4), + PINI(KB_ROW0, SYS, KBC, RSVD2, DTV, RSVD4), + PINI(KB_ROW1, SYS, KBC, RSVD2, DTV, RSVD4), + PINI(KB_ROW2, SYS, KBC, RSVD2, DTV, SOC), + PINI(KB_ROW3, SYS, KBC, DISPA, RSVD3, DISPB), + PINI(KB_ROW4, SYS, KBC, DISPA, SPI2, DISPB), + PINI(KB_ROW5, SYS, KBC, DISPA, SPI2, DISPB), + PINI(KB_ROW6, SYS, KBC, DISPA, RSVD3, DISPB), + PINI(KB_ROW7, SYS, KBC, RSVD2, CLDVFS, UARTA), + PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA), + PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA), + PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA), + PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL), + PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL), + PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4), + PINI(KB_COL3, SYS, KBC, DISPA, PWM2, UARTA), + PINI(KB_COL4, SYS, KBC, OWR, SDMMC3, UARTA), + PINI(KB_COL5, SYS, KBC, RSVD2, SDMMC1, RSVD4), + PINI(KB_COL6, SYS, KBC, RSVD2, SPI2, RSVD4), + PINI(KB_COL7, SYS, KBC, RSVD2, SPI2, RSVD4), + PINI(CLK_32K_OUT, SYS, BLINK, SOC, RSVD3, RSVD4), + PINI(SYS_CLK_REQ, SYS, SYSCLK, RSVD2, RSVD3, RSVD4), + PINI(CORE_PWR_REQ, SYS, PWRON, RSVD2, RSVD3, RSVD4), + PINI(CPU_PWR_REQ, SYS, CPU, RSVD2, RSVD3, RSVD4), + PINI(PWR_INT_N, SYS, PMI, RSVD2, RSVD3, RSVD4), + PINI(CLK_32K_IN, SYS, CLK, RSVD2, RSVD3, RSVD4), + PINI(OWR, SYS, OWR, RSVD2, RSVD3, RSVD4), + PINI(DAP1_FS, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(DAP1_DIN, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(DAP1_DOUT, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(DAP1_SCLK, AUDIO, I2S0, HDA, GMI, RSVD4), + PINI(CLK1_REQ, AUDIO, DAP, DAP1, RSVD3, RSVD4), + PINI(CLK1_OUT, AUDIO, EXTPERIPH1, DAP2, RSVD3, RSVD4), + PINI(SPDIF_IN, AUDIO, SPDIF, USB, RSVD3, RSVD4), + PINI(SPDIF_OUT, AUDIO, SPDIF, RSVD2, RSVD3, RSVD4), + PINI(DAP2_FS, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4), + PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4), + PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4), + PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2), + PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4), + PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), + PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3), + PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), + PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3), + PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3), + PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3), + PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC), + PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA), + PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4), + PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1), + PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1), + PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4), + PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), + PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), + PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4), + PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N), +}; + +void pinmux_set_tristate(enum pmux_pingrp pin, int enable) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *tri = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin */ + assert(pmux_pingrp_isvalid(pin)); + + reg = readl(tri); + if (enable) + reg |= PMUX_TRISTATE_MASK; + else + reg &= ~PMUX_TRISTATE_MASK; + writel(reg, tri); +} + +void pinmux_tristate_enable(enum pmux_pingrp pin) +{ + pinmux_set_tristate(pin, 1); +} + +void pinmux_tristate_disable(enum pmux_pingrp pin) +{ + pinmux_set_tristate(pin, 0); +} + +void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pull = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and pupd */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_pupd_isvalid(pupd)); + + reg = readl(pull); + reg &= ~(0x3 << PMUX_PULL_SHIFT); + reg |= (pupd << PMUX_PULL_SHIFT); + writel(reg, pull); +} + +void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *muxctl = &pmt->pmt_ctl[pin]; + int i, mux = -1; + u32 reg; + + /* Error check on pin and func */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_func_isvalid(func)); + + /* Handle special values */ + if (func == PMUX_FUNC_SAFE) + func = tegra_soc_pingroups[pin].func_safe; + + if (func & PMUX_FUNC_RSVD1) { + mux = func & 0x3; + } else { + /* Search for the appropriate function */ + for (i = 0; i < 4; i++) { + if (tegra_soc_pingroups[pin].funcs[i] == func) { + mux = i; + break; + } + } + } + assert(mux != -1); + + reg = readl(muxctl); + reg &= ~(0x3 << PMUX_MUXCTL_SHIFT); + reg |= (mux << PMUX_MUXCTL_SHIFT); + writel(reg, muxctl); + +} + +void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_io = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and io */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_io_isvalid(io)); + + reg = readl(pin_io); + reg &= ~(0x1 << PMUX_IO_SHIFT); + reg |= (io & 0x1) << PMUX_IO_SHIFT; + writel(reg, pin_io); +} + +static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_lock = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and lock */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_lock_isvalid(lock)); + + if (lock == PMUX_PIN_LOCK_DEFAULT) + return 0; + + reg = readl(pin_lock); + reg &= ~(0x1 << PMUX_LOCK_SHIFT); + if (lock == PMUX_PIN_LOCK_ENABLE) + reg |= (0x1 << PMUX_LOCK_SHIFT); + else { + /* lock == DISABLE, which isn't possible */ + printf("%s: Warning: lock == %d, DISABLE is not allowed!\n", + __func__, lock); + } + writel(reg, pin_lock); + + return 0; +} + +static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_od = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and od */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_od_isvalid(od)); + + if (od == PMUX_PIN_OD_DEFAULT) + return 0; + + reg = readl(pin_od); + reg &= ~(0x1 << PMUX_OD_SHIFT); + if (od == PMUX_PIN_OD_ENABLE) + reg |= (0x1 << PMUX_OD_SHIFT); + writel(reg, pin_od); + + return 0; +} + +static int pinmux_set_ioreset(enum pmux_pingrp pin, + enum pmux_pin_ioreset ioreset) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_ioreset = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and ioreset */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_ioreset_isvalid(ioreset)); + + if (ioreset == PMUX_PIN_IO_RESET_DEFAULT) + return 0; + + reg = readl(pin_ioreset); + reg &= ~(0x1 << PMUX_IO_RESET_SHIFT); + if (ioreset == PMUX_PIN_IO_RESET_ENABLE) + reg |= (0x1 << PMUX_IO_RESET_SHIFT); + writel(reg, pin_ioreset); + + return 0; +} + +void pinmux_config_pingroup(struct pingroup_config *config) +{ + enum pmux_pingrp pin = config->pingroup; + + pinmux_set_func(pin, config->func); + pinmux_set_pullupdown(pin, config->pull); + pinmux_set_tristate(pin, config->tristate); + pinmux_set_io(pin, config->io); + pinmux_set_lock(pin, config->lock); + pinmux_set_od(pin, config->od); + pinmux_set_ioreset(pin, config->ioreset); +} + +void pinmux_config_table(struct pingroup_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + pinmux_config_pingroup(&config[i]); +}