Add a hab_rvt_check_target() step to authenticate_image() as a sanity check for the target memory region authenticate_image() will run over, prior to making the BootROM authentication callback itself.
This check is recommended by the HAB documentation so it makes sense to adhere to the guidance and perform that check as directed.
Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Peng Fan peng.fan@nxp.com Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Sven Ebenfeld sven.ebenfeld@gmail.com Cc: George McCollister george.mccollister@gmail.com Cc: Breno Matheus Lima brenomatheus@gmail.com --- arch/arm/mach-imx/hab.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index eb18f76..864b1e2 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -437,12 +437,15 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size, hab_rvt_authenticate_image_t *hab_rvt_authenticate_image; hab_rvt_entry_t *hab_rvt_entry; hab_rvt_exit_t *hab_rvt_exit; + hab_rvt_check_target_t *hab_rvt_check_target; struct ivt *ivt; struct ivt_header *ivt_hdr; + enum hab_status status;
hab_rvt_authenticate_image = hab_rvt_authenticate_image_p; hab_rvt_entry = hab_rvt_entry_p; hab_rvt_exit = hab_rvt_exit_p; + hab_rvt_check_target = hab_rvt_check_target_p;
if (!is_hab_enabled()) { puts("hab fuse not enabled\n"); @@ -477,6 +480,13 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size,
start = ddr_start; bytes = image_size; + + status = hab_rvt_check_target(HAB_TGT_MEMORY, (void *)ddr_start, bytes); + if (status != HAB_SUCCESS) { + printf("HAB check target 0x%08x-0x%08x fail\n", + ddr_start, ddr_start + bytes); + goto hab_caam_clock_disable; + } #ifdef DEBUG printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr); printf("ivt entry = 0x%08x, dcd = 0x%08x, csf = 0x%08x\n", ivt->entry,