On 12/30/22 06:45, Tony Dinh wrote:
For Kirkwood boards, it is necessary to have early malloc in DRAM area when Driver Model for Serial is enabled. Please see Michael's patch here: https://lore.kernel.org/u-boot/20220817193809.1059688-20-michael@walle.cc/
This patch enables the early malloc in DRAM for all Kirkwood boards. Note that this will work for boards that have either non-DM serial and DM_SERIAL. Also, add the CONFIG_KIRKWOOD_COMMON option to enable DM_SERIAL as a common option for boards that have been tested.
Signed-off-by: Tony Dinh mibodhi@gmail.com
Applied to u-boot-marvell/master
Thanks, Stefan
arch/arm/mach-kirkwood/Kconfig | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index c8a193dd4c..45cc932636 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -12,6 +12,19 @@ config KW88F6281 config SHEEVA_88SV131 bool
+config KIRKWOOD_COMMON
- bool
- select DM_SERIAL
+config HAS_CUSTOM_SYS_INIT_SP_ADDR
bool "Use a custom location for the initial stack pointer address"default y+config CUSTOM_SYS_INIT_SP_ADDR
hex "Static location for the initial stack pointer"depends on HAS_CUSTOM_SYS_INIT_SP_ADDRdefault 0x5ff000- choice prompt "Marvell Kirkwood board select" optional
@@ -25,6 +38,7 @@ config TARGET_DREAMPLUG bool "DreamPlug Board" select KW88F6281 select SHEEVA_88SV131
select KIRKWOOD_COMMON
config TARGET_DS109 bool "Synology DS109"
@@ -40,6 +54,7 @@ config TARGET_SHEEVAPLUG bool "SheevaPlug Board" select FEROCEON_88FR131 select KW88F6281
select KIRKWOOD_COMMON
config TARGET_LSXL bool "lsxl Board"
@@ -47,16 +62,19 @@ config TARGET_LSXL select KW88F6281 select BOARD_EARLY_INIT_R select MISC_INIT_R
select KIRKWOOD_COMMON
config TARGET_POGO_E02 bool "pogo_e02 Board" select FEROCEON_88FR131 select KW88F6281
select KIRKWOOD_COMMON
config TARGET_POGO_V4 bool "Pogoplug V4 Board" select FEROCEON_88FR131 select KW88F6192
select KIRKWOOD_COMMON
config TARGET_DNS325 bool "dns325 Board"
@@ -67,6 +85,7 @@ config TARGET_ICONNECT bool "iconnect Board" select FEROCEON_88FR131 select KW88F6281
select KIRKWOOD_COMMON
config TARGET_KM_KIRKWOOD bool "KM Kirkwood Board"
@@ -92,11 +111,13 @@ config TARGET_DOCKSTAR bool "Dockstar Board" select FEROCEON_88FR131 select KW88F6281
select KIRKWOOD_COMMON
config TARGET_GOFLEXHOME bool "GoFlex Home Board" select FEROCEON_88FR131 select KW88F6281
select KIRKWOOD_COMMON
config TARGET_NAS220 bool "BlackArmor NAS220"
@@ -107,6 +128,7 @@ config TARGET_NSA310S bool "Zyxel NSA310S" select FEROCEON_88FR131 select KW88F6192
select KIRKWOOD_COMMON
config TARGET_SBx81LIFKW bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16"
Viele Grüße, Stefan Roese