On Mon, Aug 11, 2014 at 5:55 PM, Fabio Estevam festevam@gmail.com wrote:
Hi,
On a mx6qsabresd I can see U-boot to detect my Wifi card on boot:
U-Boot 2014.07-16451-g7496820-dirty (Aug 11 2014 - 17:43:44)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: MX6-SabreSD I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 8086:08b1 - Network controller
However when the 'pci' command is used I get:
=> pci Scanning PCI devices on bus 0 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.00.00 0x16c3 0xabcd Bridge device 0x04 00.01.00 0x16c3 0xabcd Bridge device 0x04
Bridge device is listed twice and the network controller does not show up.
Is this is a bug within common/cmd_pci.c ?
Looks like I need to pass the bus number to the pci command to see the wifi card:
=> pci 1 Scanning PCI devices on bus 1 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 01.00.00 0x8086 0x08b1 Network controller 0x80