Heln message 66E8AEE9980BB44CA5FCAD39EBA56AC60214AA3B@CHN-HCLT-EVS02.HCLT.CORP.HCL.IN you wrote:
I tried to download image through serial via Kermit Using commands: send /bin /tftpboot/uImage at Kermit prompt & Uboot command: loadb address
Retransmission count exceeds in Kermit and transmission of packet fails. And, on u-boot side only 0 Bytes are received. What might be the issue?
You may have forgotten to set the correct parameters in kermit. See the example .kermrc file in the U-Boot manual at http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3.
The contents of this e-mail and any attachment(s) are confidential and> intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its> affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect> the opinions of HCL or its affiliates.
...
Please omit this when posting to public mailing lists,
------_=_NextPart_001_01C7DFCC.3F3A3C3F Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
And NEVER post HTML here!
Best regards,
Wolfgang Denk