From: Etienne Carriere etienne.carriere@linaro.org
Add OP-TEE firmware node in stm32mp15 U-Boot DTSI. This node is needed since commit [1] that changed U-Boot/stm32mp15 to detect OP-TEE availability by probing the resource instead of relying on U-Boot configuration. The software sequence implemented by [1] is fine but U-Boot DTS/DTSI files were not updated accordingly since, hence OP-TEE presence is never detected by U-Boot, preventing Linux kernel from using OP-TEE resources.
For consistency and to synchronize stm32mp15 DTSI files (excluding U-Boot specific DTSI files) with the Linux kernel ones, this change also moves the OP-TEE reserved memory nodes from board generic DTSI files to U-Boot specific board DTSI files.
Link: [1] commit 43df0a159df6 ("stm32mp1: dynamically detect op-tee presence") Signed-off-by: Etienne Carriere etienne.carriere@linaro.org Signed-off-by: Patrick Delaunay patrick.delaunay@st.com ---
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 15 +++++++++++++++ arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 14 ++++++++++++++ arch/arm/dts/stm32mp157c-ed1.dts | 5 ----- arch/arm/dts/stm32mp15xx-dkx.dtsi | 5 ----- 4 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index c52abeb1e7..3fedb6f1e1 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -20,6 +20,21 @@ st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x02000000>; + no-map; + }; + }; + led { red { label = "error"; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 84af7fa47b..a07c585415 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -21,6 +21,20 @@ st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; };
+ firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x02000000>; + no-map; + }; + }; + led { red { label = "error"; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 4fb71100f5..186dc46754 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -70,11 +70,6 @@ reg = <0xe8000000 0x8000000>; no-map; }; - - optee@fe000000 { - reg = <0xfe000000 0x02000000>; - no-map; - }; };
aliases { diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index 812e370ee4..7589c6f9dc 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -58,11 +58,6 @@ reg = <0xd4000000 0x4000000>; no-map; }; - - optee@de000000 { - reg = <0xde000000 0x02000000>; - no-map; - }; };
led {