19 Nov
2013
19 Nov
'13
9:08 p.m.
On Tue, Nov 19, 2013 at 11:22:18AM +0100, Lars Poeschel wrote:
From: Lars Poeschel poeschel@lemonage.de
Phytec sells revision or version 3 of pcm051. It is labeled 1358.3 on the board. The difference for u-boot is that is has other DDR3 RAM on it: 1 x MT41K256M16HA125E instead of 2 x MT41J256M8HX15E on revisions 1 and 2. Both configurations are 512 MiB. Configure your u-boot build with pcm051_rev3 for the new RAM and pcm051_rev1 for the old RAM configuration. Board revision 2 has to use pcm051_rev1 also.
Signed-off-by: Lars Poeschel poeschel@lemonage.de
Is there no run-time way to tell if we're on rev1/2/3?
--
Tom