This patch series add support for HDMI output. Support for other, newer, SoCs, which also uses DE2 and same or similar HDMI controller and PHY can be easily added later (A83T/A64/H5/R40). Current driver can also be easily extended with TV out support, just like video driver for older Allwinner SoCs.
While driver works, I would like to get few opinions first. - From what I understand, drivers which supports DT are preferred. Would it be better to rewrite this driver to support device tree? - TCON code is currently exactly the same as in driver for older SoCs. Should I split it out into shared module? Also TV out code seems to be similar, but I didn't manage to confirm that it works as-is on H3. - A80 SoC is mix of older display engine and newer HDMI controller, so it doesn't really work with either of sunxi video drivers. Two solutions I see here are either combine both driver into one massive display driver or, much better, split everything by components (TCON/DE/DE2/HDMI/TV) and instantiate compatible ones. I guess this is not much different than adding support for DT in drivers. Note that I don't have any A80 board, I'm just thinking ahead.
Best regards, Jernej Skrabec
Jernej Skrabec (3): sunxi: Add clocks for DE2/HDMI/TCON sunxi: video: Add video driver for H3 SoC sunxi: Enable H3 video driver in defconfigs
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 43 + arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 8 + arch/arm/include/asm/arch-sunxi/display2.h | 377 +++++++++ arch/arm/mach-sunxi/clock_sun6i.c | 28 + board/sunxi/Kconfig | 4 +- configs/orangepi_2_defconfig | 1 + configs/orangepi_lite_defconfig | 1 + configs/orangepi_one_defconfig | 1 + configs/orangepi_pc_defconfig | 1 + configs/orangepi_pc_plus_defconfig | 1 + configs/orangepi_plus2e_defconfig | 1 + configs/orangepi_plus_defconfig | 1 + drivers/video/Makefile | 1 + drivers/video/sunxi_display2.c | 1037 +++++++++++++++++++++++++ include/configs/sunxi-common.h | 17 +- scripts/config_whitelist.txt | 1 + 16 files changed, 1516 insertions(+), 7 deletions(-) create mode 100644 arch/arm/include/asm/arch-sunxi/display2.h create mode 100644 drivers/video/sunxi_display2.c