On Thursday 04 June 2009 08:50:21 Daniel Mack wrote:
UBI error: ubi_init: cannot attach mtd1 UBI error: ubi_init: UBI error: cannot initialize UBI, error -12 UBI init error -12 exit not allowed from main input shell.
Did you erase the FLASH partition? If not please try again after erasing.
I used ubiformat from Linux using /dev/ubi0 which is attached to /dev/mtd4 which again points to the same area in the flash than 'ubilayer' does in U-Boot. So I should be able to access that same volume from the bootloader, right? Or do I miss some important point?
I have to admit that I never used it this way. Using "ubi part" on an erased partition works fine. I suggest you give it a try.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================