From: Krunal Bhargav k-bhargav@ti.com
Before the priming begins, we need to disable RMW (Read Modify Write) and disable ECC verification for read accesses. By default, the EMIF tool enables RMW and read accesses in the EMIF_ECC_CTRL_REG.
Signed-off-by: Krunal Bhargav k-bhargav@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/mach-omap2/emif-common.c | 34 +++++++++++++++++++------------ 1 file changed, 21 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/emif-common.c b/arch/arm/mach-omap2/emif-common.c index 9bdaa388c9..290f9dcdb0 100644 --- a/arch/arm/mach-omap2/emif-common.c +++ b/arch/arm/mach-omap2/emif-common.c @@ -348,7 +348,7 @@ static void dra7_reset_ddr_data(u32 base, u32 size) static void dra7_enable_ecc(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 rgn, rgn_start, size; + u32 rgn, rgn_start, size, ctrl_reg;
/* ECC available only on dra76x EMIF1 */ if ((base != EMIF1_BASE) || !is_dra76x()) @@ -358,11 +358,28 @@ static void dra7_enable_ecc(u32 base, const struct emif_regs *regs) /* Disable high-order interleaving */ clrbits_le32(MA_PRIORITY, MA_HIMEM_INTERLEAVE_UN_MASK);
+#ifdef CONFIG_DRA7XX + /* Clear the status flags and other history */ + writel(readl(&emif->emif_1b_ecc_err_cnt), + &emif->emif_1b_ecc_err_cnt); + writel(0xffffffff, &emif->emif_1b_ecc_err_dist_1); + writel(0x2, &emif->emif_1b_ecc_err_addr_log); + writel(0x1, &emif->emif_2b_ecc_err_addr_log); + writel(EMIF_INT_WR_ECC_ERR_SYS_MASK | + EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK | + EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK, + &emif->emif_irqstatus_sys); +#endif writel(regs->emif_ecc_address_range_1, &emif->emif_ecc_address_range_1); writel(regs->emif_ecc_address_range_2, &emif->emif_ecc_address_range_2); - writel(regs->emif_ecc_ctrl_reg, &emif->emif_ecc_ctrl_reg); + + /* Disable RMW and ECC verification for read accesses */ + ctrl_reg = (regs->emif_ecc_ctrl_reg & + ~EMIF_ECC_REG_RMW_EN_MASK) | + EMIF_ECC_CTRL_REG_ECC_VERIFY_DIS_MASK; + writel(ctrl_reg, &emif->emif_ecc_ctrl_reg);
/* Set region1 memory with 0 */ rgn_start = (regs->emif_ecc_address_range_1 & @@ -386,17 +403,8 @@ static void dra7_enable_ecc(u32 base, const struct emif_regs *regs) EMIF_ECC_REG_ECC_ADDR_RGN_2_EN_MASK) dra7_reset_ddr_data(rgn, size);
-#ifdef CONFIG_DRA7XX - /* Clear the status flags and other history */ - writel(readl(&emif->emif_1b_ecc_err_cnt), - &emif->emif_1b_ecc_err_cnt); - writel(0xffffffff, &emif->emif_1b_ecc_err_dist_1); - writel(0x1, &emif->emif_2b_ecc_err_addr_log); - writel(EMIF_INT_WR_ECC_ERR_SYS_MASK | - EMIF_INT_TWOBIT_ECC_ERR_SYS_MASK | - EMIF_INT_ONEBIT_ECC_ERR_SYS_MASK, - &emif->emif_irqstatus_sys); -#endif + /* Default value enables RMW and ECC verification */ + writel(regs->emif_ecc_ctrl_reg, &emif->emif_ecc_ctrl_reg); } }