Hi
This matches how it was done for pre-K3 TI platforms and it allows us to move the forward declaration out of sys_proto.h.
It also removes the need for K3_BOARD_DETECT as one is free to simply override the weak function in their board files as needed.
Signed-off-by: Andrew Davis afd@ti.com
arch/arm/mach-k3/Kconfig | 5 ----- arch/arm/mach-k3/am642_init.c | 4 ++-- arch/arm/mach-k3/am654_init.c | 4 ++-- arch/arm/mach-k3/common.c | 10 ++++++++++ arch/arm/mach-k3/common.h | 2 ++ arch/arm/mach-k3/include/mach/sys_proto.h | 2 -- arch/arm/mach-k3/j721e_init.c | 8 ++++---- board/ti/common/Kconfig | 1 - 8 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 7edbac26ccc..a8c3a593d57 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -187,11 +187,6 @@ config K3_X509_SWRV help SWRV for X509 certificate used for boot images
-config K3_BOARD_DETECT
bool "Support for Board detection"helpSupport for board detection.source "board/ti/am65x/Kconfig" source "board/ti/am64x/Kconfig" source "board/ti/am62x/Kconfig" diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c index c7720cbaf35..9a34a3f9451 100644 --- a/arch/arm/mach-k3/am642_init.c +++ b/arch/arm/mach-k3/am642_init.c @@ -100,8 +100,8 @@ void do_dt_magic(void) { int ret, rescan;
if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))do_board_detect();
/* Perform EEPROM-based board detection */
Can we remove that comment as it is not true? I use this to perform an fpga based board detection on a am642 platform.
That comment goes for every occurance of that line in this patch.
do_board_detect(); /* * Board detection has been done.diff --git a/arch/arm/mach-k3/am654_init.c b/arch/arm/mach-k3/am654_init.c index 12d74635cb0..5a9a780f521 100644 --- a/arch/arm/mach-k3/am654_init.c +++ b/arch/arm/mach-k3/am654_init.c @@ -245,8 +245,8 @@ void board_init_f(ulong dummy) /* Output System Firmware version info */ k3_sysfw_print_ver();
if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))do_board_detect();
/* Perform EEPROM-based board detection */do_board_detect();#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0) ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs), diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index 4f2e14c3105..115f5959734 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -636,3 +636,13 @@ int misc_init_r(void)
return 0;}
+/**
- do_board_detect() - Detect board description
- Function to detect board description. This is expected to be
- overridden in the SoC family board file where desired.
- */
+void __weak do_board_detect(void) +{ +} diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index 531be0be54c..130f5021123 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -35,3 +35,5 @@ void mmr_unlock(phys_addr_t base, u32 partition); bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data); enum k3_device_type get_device_type(void); void ti_secure_image_post_process(void **p_image, size_t *p_size); +struct ti_sci_handle *get_ti_sci_handle(void); +void do_board_detect(void); diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h index 8cc75b636b5..939de0f79b4 100644 --- a/arch/arm/mach-k3/include/mach/sys_proto.h +++ b/arch/arm/mach-k3/include/mach/sys_proto.h @@ -10,8 +10,6 @@ void sdelay(unsigned long loops); u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, u32 bound); -struct ti_sci_handle *get_ti_sci_handle(void); -int do_board_detect(void); int fdt_disable_node(void *blob, char *node_path);
void k3_spl_init(void); diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index b5a69255f76..3fda2dfaa1b 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -160,8 +160,8 @@ void do_dt_magic(void) int ret, rescan, mmc_dev = -1; static struct mmc *mmc;
if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))do_board_detect();
/* Perform EEPROM-based board detection */do_board_detect(); /* * Board detection has been done.@@ -287,8 +287,8 @@ void board_init_f(ulong dummy) /* Output System Firmware version info */ k3_sysfw_print_ver();
if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))do_board_detect();
/* Perform EEPROM-based board detection */do_board_detect();#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0) ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs), diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index f03357cc751..49edd98014a 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -1,6 +1,5 @@ config TI_I2C_BOARD_DETECT bool "Support for Board detection for TI platforms"
select K3_BOARD_DETECT if ARCH_K3 help Support for detection board information on Texas Instrument's Evaluation Boards which have I2C based EEPROM detection-- 2.39.2