Hi Denk:
Thanks your help. Just because the serial console can not work on my board, so I step into kernel to trace. I think maybe the kernel init sequence can not arrive the console_init(), so I can not get any message after run "bootm". It just told me "Uncompressing Kernel Image ... OK", then it hangs. Bye the way, I only the u-boot 1.1.1 and linux kernel 2.4.22 in hand, where I can find the lastest code?
Thanks again! BRG
----- Original Message ----- From: "Wolfgang Denk" wd@denx.de To: "Alex shi" alex.shi@tom.com Cc: u-boot-users@lists.sourceforge.net Sent: Thursday, June 23, 2005 8:11 AM Subject: Re: [U-Boot-Users] debug linux kernel hangs
Hello,
in message 021a01c57785$fc451a30$4500a8c0@baniantealex you wrote:
My box is MPC8247 I use u-boot 1.1.1 to boot linux kernel 2.4.22, the bd_info are same in
Both the versions of U-Boot and Linux kernel are very, very old. I strongly recommend to use more current versions of the software.
620 ppc_md.setup_arch(); (gdb) n
<<<<< long time wait and then press ctl + c.
...
#0 0xc0007e4c in __delay () at time.c:427 #1 0xc0015ae4 in panic (fmt=0x2bbbd "\001") at delay.h:42
So your kernel has paniced.
and panic a message to me, isn't it?
Indeed. And what was the panic message? What was the contents of the log_buf area?
I'm afraid you will have to type the commands to display the contents of the log buffer yourself - you did not give instructions how to log in on your system.
See also http://www.denx.de/twiki/bin/view/DULG/LinuxPostMortemAnalysis
And by the way: this is a Linux problem, so all of this is completely off topic on this list.
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "'Tis true, 'tis pity, and pity 'tis 'tis true."
- Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_