priv->pid is uint32_t, but dev_read_addr() returns a uint64_t on arm64, with the upper bits being used for error codes. Do error checking before downcasting to u32 to prevent errors being silently ignored.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- drivers/gpio/qcom_pmic_gpio.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c index 65feb453ebc3..e5841f502953 100644 --- a/drivers/gpio/qcom_pmic_gpio.c +++ b/drivers/gpio/qcom_pmic_gpio.c @@ -221,11 +221,14 @@ static int qcom_gpio_probe(struct udevice *dev) { struct qcom_gpio_bank *priv = dev_get_priv(dev); int reg; + u64 pid;
- priv->pid = dev_read_addr(dev); - if (priv->pid == FDT_ADDR_T_NONE) + pid = dev_read_addr(dev); + if (pid == FDT_ADDR_T_NONE) return log_msg_ret("bad address", -EINVAL);
+ priv->pid = pid; + /* Do a sanity check */ reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE); if (reg != REG_TYPE_VAL) @@ -328,11 +331,14 @@ static int qcom_pwrkey_probe(struct udevice *dev) { struct qcom_gpio_bank *priv = dev_get_priv(dev); int reg; + u64 pid;
- priv->pid = dev_read_addr(dev); - if (priv->pid == FDT_ADDR_T_NONE) + pid = dev_read_addr(dev); + if (pid == FDT_ADDR_T_NONE) return log_msg_ret("bad address", -EINVAL);
+ priv->pid = pid; + /* Do a sanity check */ reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE); if (reg != 0x1)