On Qualcomm platforms, the TZ may already have certain memory regions under protection by the time U-Boot starts. There is a rare case on some platforms where the prefetcher might speculatively access one of these regions resulting in a board crash (TZ traps and then resets the board).
We shouldn't be accessing these regions from within U-Boot anyway, so let's mark them all with PTE_TYPE_FAULT to prevent any speculative access and correctly trap in EL1 rather than EL3.
This is quite costly with caches off (takes ~2 seconds on SDM845 vs 35ms with caches on). So to minimise the impact this is only enabled on QCS404 for now (where the issue is known to occur).
In the future, we should try to find a more efficient way to handle this, perhaps by turning on the MMU in stages.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- arch/arm/mach-snapdragon/board.c | 162 +++++++++++++++++++++++++++++++++------ 1 file changed, 140 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c index 5a859aabd5c4..f12f5791a136 100644 --- a/arch/arm/mach-snapdragon/board.c +++ b/arch/arm/mach-snapdragon/board.c @@ -25,6 +25,7 @@ #include <lmb.h> #include <malloc.h> #include <usb.h> +#include <sort.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -296,7 +297,7 @@ int board_late_init(void)
static void build_mem_map(void) { - int i; + int i, j;
/* * Ensure the peripheral block is sized to correctly cover the address range @@ -312,28 +313,23 @@ static void build_mem_map(void) PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
- debug("Configured memory map:\n"); - debug(" 0x%016llx - 0x%016llx: Peripheral block\n", - mem_map[0].phys, mem_map[0].phys + mem_map[0].size); - - /* - * Now add memory map entries for each DRAM bank, ensuring we don't - * overwrite the list terminator - */ - for (i = 0; i < ARRAY_SIZE(rbx_mem_map) - 2 && gd->bd->bi_dram[i].size; i++) { - if (i == ARRAY_SIZE(rbx_mem_map) - 1) { - log_warning("Too many DRAM banks!\n"); - break; - } - mem_map[i + 1].phys = gd->bd->bi_dram[i].start; - mem_map[i + 1].virt = mem_map[i + 1].phys; - mem_map[i + 1].size = gd->bd->bi_dram[i].size; - mem_map[i + 1].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE; - - debug(" 0x%016llx - 0x%016llx: DDR bank %d\n", - mem_map[i + 1].phys, mem_map[i + 1].phys + mem_map[i + 1].size, i); + for (i = 1, j = 0; i < ARRAY_SIZE(rbx_mem_map) - 1 && gd->bd->bi_dram[j].size; i++, j++) { + mem_map[i].phys = gd->bd->bi_dram[j].start; + mem_map[i].virt = mem_map[i].phys; + mem_map[i].size = gd->bd->bi_dram[j].size; + mem_map[i].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | \ + PTE_BLOCK_INNER_SHARE; } + + mem_map[i].phys = UINT64_MAX; + mem_map[i].size = 0; + +#ifdef DEBUG + debug("Configured memory map:\n"); + for (i = 0; mem_map[i].size; i++) + debug(" 0x%016llx - 0x%016llx: entry %d\n", + mem_map[i].phys, mem_map[i].phys + mem_map[i].size, i); +#endif }
u64 get_page_table_size(void) @@ -341,10 +337,132 @@ u64 get_page_table_size(void) return SZ_64K; }
+static int fdt_cmp_res(const void *v1, const void *v2) +{ + const struct fdt_resource *res1 = v1, *res2 = v2; + + return res1->start - res2->start; +} + +#define N_RESERVED_REGIONS 32 + +/* Mark all no-map regions as PTE_TYPE_FAULT to prevent speculative access. + * On some platforms this is enough to trigger a security violation and trap + * to EL3. + */ +static void carve_out_reserved_memory(void) +{ + static struct fdt_resource res[N_RESERVED_REGIONS] = { 0 }; + int parent, rmem, count, i = 0; + phys_addr_t start; + size_t size; + + /* Some reserved nodes must be carved out, as the cache-prefetcher may otherwise + * attempt to access them, causing a security exception. + */ + parent = fdt_path_offset(gd->fdt_blob, "/reserved-memory"); + if (parent <= 0) { + log_err("No reserved memory regions found\n"); + return; + } + + /* Collect the reserved memory regions */ + fdt_for_each_subnode(rmem, gd->fdt_blob, parent) { + const fdt32_t *ptr; + int len; + if (!fdt_getprop(gd->fdt_blob, rmem, "no-map", NULL)) + continue; + + if (i == N_RESERVED_REGIONS) { + log_err("Too many reserved regions!\n"); + break; + } + + /* Read the address and size out from the reg property. Doing this "properly" with + * fdt_get_resource() takes ~70ms on SDM845, but open-coding the happy path here + * takes <1ms... Oh the woes of no dcache. + */ + ptr = fdt_getprop(gd->fdt_blob, rmem, "reg", &len); + if (ptr) { + /* Qualcomm devices use #address/size-cells = <2> but all reserved regions are within + * the 32-bit address space. So we can cheat here for speed. + */ + res[i].start = fdt32_to_cpu(ptr[1]); + res[i].end = res[i].start + fdt32_to_cpu(ptr[3]); + i++; + } + } + + /* Sort the reserved memory regions by address */ + count = i; + qsort(res, count, sizeof(struct fdt_resource), fdt_cmp_res); + + /* Now set the right attributes for them. Often a lot of the regions are tightly packed together + * so we can optimise the number of calls to mmu_change_region_attr() by combining adjacent + * regions. + */ + start = ALIGN_DOWN(res[0].start, SZ_2M); + size = ALIGN(res[0].end - start, SZ_2M); + for (i = 1; i <= count; i++) { + /* We ideally want to 2M align everything for more efficient pagetables, but we must avoid + * overwriting reserved memory regions which shouldn't be mapped as FAULT (like those with + * compatible properties). + * If within 2M of the previous region, bump the size to include this region. Otherwise + * start a new region. + */ + if (i == count || start + size < res[i].start - SZ_2M) { + debug(" 0x%016llx - 0x%016llx: reserved\n", + start, start + size); + mmu_change_region_attr(start, size, PTE_TYPE_FAULT); + /* If this is the final region then quit here before we index + * out of bounds... + */ + if (i == count) + break; + start = ALIGN_DOWN(res[i].start, SZ_2M); + size = ALIGN(res[i].end - start, SZ_2M); + } else { + /* Bump size if this region is immediately after the previous one */ + size = ALIGN(res[i].end - start, SZ_2M); + } + } +} + +/* This function open-codes setup_all_pgtables() so that we can + * insert additional mappings *before* turning on the MMU. + */ void enable_caches(void) { + u64 tlb_addr = gd->arch.tlb_addr; + u64 tlb_size = gd->arch.tlb_size; + u64 pt_size; + ulong carveout_start; + + gd->arch.tlb_fillptr = tlb_addr; + build_mem_map();
icache_enable(); + + /* Create normal system page tables */ + setup_pgtables(); + + pt_size = (uintptr_t)gd->arch.tlb_fillptr - + (uintptr_t)gd->arch.tlb_addr; + debug("Primary pagetable size: %lluKiB\n", pt_size / 1024); + + /* Create emergency page tables */ + gd->arch.tlb_size -= pt_size; + gd->arch.tlb_addr = gd->arch.tlb_fillptr; + setup_pgtables(); + gd->arch.tlb_emerg = gd->arch.tlb_addr; + gd->arch.tlb_addr = tlb_addr; + gd->arch.tlb_size = tlb_size; + + carveout_start = get_timer(0); + /* Takes ~20-50ms on SDM845 */ + carve_out_reserved_memory(); + debug("carveout time: %lums\n", get_timer(carveout_start)); + dcache_enable(); }