Hi Wolfgang,
On Wed, Dec 5, 2018 at 7:52 AM Wolfgang Denk wd@denx.de wrote:
Please try it on the shell:
-> echo $(( ((768 - 69) * 1024) )) 715776 -> echo $(( (1 * 1024) )) 1024
This works fine.
It does for me, if I set the limit low:
OBJCOPY spl/u-boot-spl-nodtb.bin COPY spl/u-boot-spl.bin CFGS spl/u-boot-spl.cfgout MKIMAGE SPL OBJCOPY u-boot.srec OBJCOPY u-boot-nodtb.bin u-boot-nodtb.bin exceeds file size limit: limit: 1024 bytes actual: 480172 bytes excess: 479148 bytes make: *** [Makefile:1071: u-boot-nodtb.bin] Error 1
Previously I tested on a machine running Ubuntu 16.04 and today I also tested on another machine running Ubuntu 18.04.
The results are the same on both machines:
1. I get a "expecting primary" warning:
OBJCOPY u-boot-nodtb.bin /bin/sh: 1: arithmetic expression: expecting primary: ""(1 * 1024)"" SYM u-boot.sym COPY u-boot.bin MKIMAGE u-boot.img LD spl/drivers/usb/host/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl OBJCOPY spl/u-boot-spl-nodtb.bin COPY spl/u-boot-spl.bin CFGS spl/u-boot-spl.cfgout MKIMAGE SPL
2. The overlap is not detected anymore. In the example below I forced #define CONFIG_BOARD_SIZE_LIMIT (1 * 1024)