On Fri, Sep 01, 2023 at 07:25:42PM +0900, Masahisa Kojima wrote:
This adds the description about HTTP Boot.
Signed-off-by: Masahisa Kojima masahisa.kojima@linaro.org
doc/develop/uefi/uefi.rst | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst index a7a41f2fac..fd87bb1edb 100644 --- a/doc/develop/uefi/uefi.rst +++ b/doc/develop/uefi/uefi.rst @@ -594,6 +594,27 @@ UEFI variables. Booting according to these variables is possible via:: As of U-Boot v2020.10 UEFI variables cannot be set at runtime. The U-Boot command 'efidebug' can be used to set the variables.
+UEFI HTTP Boot +~~~~~~~~~~~~~~
+HTTP Boot provides the capability for system deployment and configuration +over the network. HTTP Boot can be activated by specifying::
- CONFIG_CMD_DNS
- CONFIG_CMD_WGET
- CONFIG_BLKMAP
+Set up the load option specifying the target URI::
- efidebug boot add -u 1 netinst http://foo/bar
+When this load option is selected as boot selection, resolve the +host ip address by dhs, then download the file with wget.
dhs -> dns what happens if it's an IP address?
+If the downloaded file extension is .iso or .img file, efibootmgr tries to +mount the image and boot with the default file(e.g. EFI/BOOT/BOOTAA64.EFI). +If the downloaded file extension is .efi and file is PE-COFF image, +load the downloaded file and start it.
Executing the built in hello world application
-- 2.34.1
Thanks /Ilias