Re: [U-Boot] U-Boot hangs after uncompressing kernel image on MPC5200B

On Thu, Jan 22, 2009 at 4:05 AM, Marco Antônio Possamai marco.possamai@mail.com wrote:

Hello, all.

My goal is to succesfully pass a 2.6.26 linux kernel to the MPC5200B using the three-argument command bootm.

[...]

I've built the image using the make ARCH=powerpc zImage command. It creates the cuImage.lite5200b along with the lite5200.dts (which I've compiled to a lite5200.dtb using the above mentioned dtc).

If you want to use the 3 argument bootm (kerneladdr, rootfsaddr, dtbaddr) then you need to use the uImage produced by the kernel build, *not* the cuImage. The cuImage is a backwards compatible image for the older 2 argument bootm command.

g.