add support for USB mass storage to USB0 port of phyBOARD Pollux.
tested with "ums 0 mmc 2"
Signed-off-by: Benjamin Hahn B.Hahn@phytec.de --- arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 13 +++++++++++++ configs/phycore-imx8mp_defconfig | 7 +++++++ 2 files changed, 20 insertions(+)
diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi index 5d6974f8fa..dcef4d4c2a 100644 --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi @@ -70,15 +70,28 @@ bootph-pre-ram; };
+&usb3_0 { + status = "okay"; + dr_mode = "peripheral"; +}; + &usb3_1 { status = "okay"; dr_mode = "host"; };
+&usb_dwc3_0 { + status = "okay"; +}; + &usb_dwc3_1 { status = "okay"; };
+&usb3_phy0 { + status = "okay"; +}; + &usb3_phy1 { status = "okay"; }; diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 74450b957b..e3fe4ed94e 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -66,6 +66,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -123,6 +124,7 @@ CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y @@ -130,4 +132,9 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y