Hi Michal,
Am Montag, den 09.07.2012, 11:20 +0200 schrieb Michal Simek:
Read configuration from DTB.
Signed-off-by: Michal Simek monstr@monstr.eu
arch/microblaze/cpu/timer.c | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/arch/microblaze/cpu/timer.c b/arch/microblaze/cpu/timer.c index dfaaaf5..91ca42b 100644 --- a/arch/microblaze/cpu/timer.c +++ b/arch/microblaze/cpu/timer.c @@ -25,6 +25,9 @@ #include <common.h> #include <asm/microblaze_timer.h> #include <asm/microblaze_intc.h> +#include <fdtdec.h>
+DECLARE_GLOBAL_DATA_PTR;
volatile int timestamp = 0; microblaze_timer_t *tmr; @@ -62,11 +65,33 @@ int timer_init (void) u32 preload = 0; u32 ret = 0;
+#ifndef CONFIG_OF_CONTROL #if defined(CONFIG_SYS_TIMER_0_ADDR) && defined(CONFIG_SYS_INTC_0_NUM) preload = XILINX_CLOCK_FREQ / CONFIG_SYS_HZ; irq = CONFIG_SYS_TIMER_0_IRQ; tmr = (microblaze_timer_t *) (CONFIG_SYS_TIMER_0_ADDR); #endif +#else
- int temp;
- int offset = 0;
- offset = fdt_node_offset_by_compatible(gd->fdt_blob, offset,
"xlnx,xps-timer-1.00.a");- if (offset > 0) {
temp = fdtdec_get_addr(gd->fdt_blob, offset, "reg");if (temp != FDT_ADDR_T_NONE) {tmr = (microblaze_timer_t *)temp;irq = fdtdec_get_int(gd->fdt_blob, offset,"interrupts", -1);if (irq == -1)
irq is u32 (unsigned) -- my be a problem. But yes, I'm missing a compilation warning here ...
br, Stephan
panic("Connect IRQ to system timer\n");/* Set default clock frequency */temp = fdtdec_get_int(gd->fdt_blob, offset,"clock-frequency", 0);preload = temp / CONFIG_SYS_HZ;}- }
+#endif
if (tmr && irq && preload) { tmr->loadreg = preload;