Please start reading http://www.catb.org/%7eesr/faqs/smart-questions.html
Please provide a meaningful Subject when posting on this list!!!
Please do not reply to unrelated messages, as this will cause incorrect message thrading!
In message 5DF83221BE20114E9C331F665ACBC08002055D8B@dbde01.ent.ti.com you wrote:
I am trying to use U-boot 1.1.4 with the gccversion 3.4.3 (Montavista tool chain). U-Boot builds OK but no output on the serial port. The same U-boot source was working fine with the previous version of tool chain.
Have any one faced this problem before with the 3.4.3 tool chain.
You don't mention which architecture or board you are talking abouyt. Is this a custom board, or one of the supported boards?
-----Original Message----- From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] On Behalf Of u-boot-users-request@lists.sourceforge.net Sent: Sunday, October 15, 2006 5:40 AM To: u-boot-users@lists.sourceforge.net Subject: U-Boot-Users Digest, Vol 5, Issue 43
And don't top post / full quote.
And don't quote completely unrelated text.
Best regards,
Wolfgang Denk