Yes I have all the defines related to the NAND.
I understand the stuff in cmd_nand.c is not called directly from U-Boot code, so what's the mechanism which includes this file in the link stage?
On 10/23/06, Stefan Roese <sr@denx.de> wrote:
Hi Jack,
On Monday 23 October 2006 13:43, you wrote:
> I've implemented the NAND interface with functions registerd in nand_chip
> struct. All compiles fine but somehow the cmd_nand.c is not getting linked.
> I get the U-Boot image with all my nand flash functions inside but since
> cmd_nand.c is not linked, U_BOOT_CMD does not register the nand commands.
> I have
>
> #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND
>
> in my boardconfig.h
>
> Is there anything else needed?
Do you have something like:
/*
* NAND-FLASH stuff
*/
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CFG_NAND_BASE 0x51000000 /* NAND FLASH Base Address
*/
in your config file? And please make sure that you don't
have "CFG_NAND_LEGACY" defined.
BTW: Please keep send those kind of messages to the list and not _only_ to me.
Thanks.
Best regards,
Stefan