On Thu, Mar 3, 2011 at 7:43 PM, Alexander Holler holler@ahsoftware.de wrote:
Am 03.03.2011 00:48, schrieb Robert Nelson:
On Wed, Mar 2, 2011 at 5:41 PM, Alexander Hollerholler@ahsoftware.de wrote:
Hello Jason,
Am 02.03.2011 21:26, schrieb Jason Kridner:
For backwards compatibility the use of boot.scr is still supported.
Sorry, but I think that line in the description should get removed too.
So, just a thought.. Are you guys planning to push this same boot method to all the other "omap" devices that just finally got boot.scr boot support by default in u-boot? It also seems's like it'll end up be the FAQ of the month for the beagleboard group.. ;)
I would say that should be decided by every board-maintainer, just like the change from ttyS2 to ttyO2. E.g. I don't think the devkit8000-sdk will change as soon as the stuff the for the beagleboard.
Oh, we will work around it over the transition, so it's not a big deal..
It was just kinda nice, (if we assume all boards have xlo/u-boot in nand) that most boards would boot on one boot.scr/kernel/rootfs combination. Since the mainline kernel can boot on all omap2/3/4 boards (in mainline) at this point..
But since both the xM/Panda don't have nand, my point's kinda moot as they'll need a different xlo/u-boot...
Regards,