When cadence_qspi_versal_flash_reset() function is called in mini u-boot where there is no firmware support, it is missing defines for macro's BOOT_MODE_POR_0 & BOOT_MODE_POR_1. Remove them and replace with already define macro's which have same values as these.
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@amd.com ---
(no changes since v1)
drivers/spi/cadence_ospi_versal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/cadence_ospi_versal.c b/drivers/spi/cadence_ospi_versal.c index a9547a8200..e0d5e6b9e6 100644 --- a/drivers/spi/cadence_ospi_versal.c +++ b/drivers/spi/cadence_ospi_versal.c @@ -182,11 +182,11 @@ int cadence_qspi_versal_flash_reset(struct udevice *dev)
/* set direction as output */ writel((readl(BOOT_MODE_DIR) | BIT(FLASH_RESET_GPIO)), - BOOT_MODE_POR_0); + BOOT_MODE_DIR);
/* Data output enable */ writel((readl(BOOT_MODE_OUT) | BIT(FLASH_RESET_GPIO)), - BOOT_MODE_POR_1); + BOOT_MODE_OUT);
/* IOU SLCR write enable */ writel(0, WPROT_PMC_MIO);