From: Marcel Ziswiler marcel.ziswiler@toradex.com
An assortment of fixes and improvements like an Ethernet PHY configuration fix, DEK blob encapsulation preparation, migration to using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0 hardware support [1], renaming kernel image variable, using preboot for fdtfile evaluation and watchdog pinctrl fix.
Note that this series is applied on top of Peng's Makefile fix [2] as otherwise, it may not quite generate all binman artefacts in the right order as discussed here [3].
[1] https://developer.toradex.com/verdin-sample-phase-over [2] https://marc.info/?l=u-boot&m=162908373904742 [3] https://marc.info/?l=u-boot&m=162945614207220
Changes in v4: - Add Heiko Schocher's reviewed-by tag. - Fix copyright periods. - Re-based.
Changes in v3: - Case fold hex string. - Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from imx8mm-evk and postpone further improvements to after migrating to a common binman config as agreed with Frieder and Simon. - New patch cleaning up include order. - Add Fabio's reviewed-by tag. - Fix patch. - Add missing apalis-imx8 part. - While at it update copyright year resp. period. - Fix closing endif comment.
Changes in v2: - Explicitly pass filename to binman when generating binaries as suggested by Heiko. - Use proper intermediate binary u-boot-spl-ddr.bin for imximage as pointed out by Heiko. - Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation") as a similar fix was already refused earlier. - New patch allows booting recent embedded Linux BSPs. - New patch addressing dynamic fdtfile definition. - New patch fixing watchdog pinctrl issue.
Igor Opaniuk (1): verdin-imx8mm: use preboot for fdtfile evaluation
Marcel Ziswiler (6): imx8m: clean-up kconfig indentation verdin-imx8mm: fix ethernet ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation verdin-imx8mm: switch to use binman to pack images verdin-imx8mm: clean-up include order verdin-imx8mm: fix watchdog pinctrl issue
Max Krummenacher (2): verdin-imx8mm: enable sleep_moci output verdin-imx8mm: drop support for v1.0 hardware
Oleksandr Suvorov (1): include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable
arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 135 +++++++++++++++++++- arch/arm/dts/imx8mm-verdin.dts | 20 ++- arch/arm/mach-imx/imx8m/Kconfig | 21 +-- board/toradex/verdin-imx8mm/imximage.cfg | 11 +- board/toradex/verdin-imx8mm/verdin-imx8mm.c | 81 +----------- configs/verdin-imx8mm_defconfig | 6 +- doc/board/toradex/verdin-imx8mm.rst | 53 ++++---- include/configs/apalis-imx8.h | 6 +- include/configs/verdin-imx8mm.h | 10 +- 9 files changed, 215 insertions(+), 128 deletions(-)