On 11/04/2013 03:56 PM, Eric Nelson wrote:
This patch set consolidates mux and pad declarations for the i.MX6 Dual/Quad and Dual-Lite/Solo processor variants.
Patch 1 replaces the mux/pad names with their equivalents from the Linux kernel (from linux-next). This Patch 2 removes a set of completely useless pad declarations Patch 3 adds a number of registers that are defined in the Linux kernel and in the DLS variant, but not in the DQ. Patch 4 removes pad declarations that aren't used and aren't defined in the Linux kernel tree Patch 5 cleans up the whitespace in mx6[q|dl]_pins.h so the IOMUX_PAD() columns line up.
Note to reviewers: Because the majority of the changes in this patch set are simple name changes, using the '--word-diff' git parameter makes review much easier:
~/u-boot$ git diff HEAD^^^ --word-diff
I forgot to add that this patch set is based on imx-master with three additional dependencies. The first was just submitted today. The other two were merged to U-Boot master via u-boot-usb.
--- mx6: titanium: Move BSP code to barco board directory http://patchwork.ozlabs.org/patch/288124/
--- mx6: iomux: add GPR1 defines for use with nitrogen6x 7132869d in u-boot master http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=commitdiff;h=7132869d4c9e03180...
--- mx6: nitrogen6x: add otg usb host/device mode support 08ce074e in u-boot master http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=commitdiff;h=08ce074e56a1499e7...
Regards,
Eric