In message 20041016074312.6060.qmail@web90005.mail.scd.yahoo.com you wrote:
We have an atmel at91rm9200 qi-002 board from a vendor having vendor's monitor image, ramdisk image, and kernel image 2.4.19-rmk7 in flash.
I tried to use u-boot 1.1.1 with the configuration of at91rm2900dk_config:
This will usually only work on the AT91RM2900DK board.
This generated the requried u-boot, u-boot.bin, u-boot.srec files. I tried to run it from the target ARM SDRAM, but, nothing happened. No output at all.
This is to be expected, and twice so: First, you are running with a probaly inappropriate board configuration, and second, U-Boot must be installed in flash, replacing the original boot loader.
Do I have to rewrite the entire configuration files for the new target board for u-boot to work on the new board? Any suggestions?
Yes, you must port U-Boot to new hardware.
Best regards,
Wolfgang Denk