In message 20060623113017.79978.qmail@web53609.mail.yahoo.com you wrote:
We are using luan type customized board & wanna
There is no such thing as a "luan type customized board" either it's an original luan board, or it is a custom board, for which you have to port U-Boot.
is AM29BX16, it is a 16 MB flash with the starting address as 0xff000000,their are 256 blocks & each block is 64kb in size.I tried loading u-boot in 0xfff10000 as starting
If you configred U-Boot for this load address, then the image should have been 960 kB in size... This doesn't make much sense to me.
properly) .Since this is 440 processor family is that any constrains need to considered while programming
Did you wrote anything to the reset vector at 0xFFFFFFFC ?
u-boot image to flash. It's very urgent please help me.Thanks in advance.
If it's urgent I recommend to buy commercial support. Thi sis a mailing list, where you get help for free when we have time.
Best regards,
Wolfgang Denk