25 Jun
2013
25 Jun
'13
11:08 p.m.
On Tue, Jun 25, 2013 at 06:49:05PM +0200, Frederic Leroy wrote:
From: Frédéric Leroy fredo@starox.org
The cloudbox device have a different ethernet phy setup than other ns2 devices. We get initialization value from the GPL LaCie source
Signed-off-by: Frédéric Leroy fredo@starox.org
board/LaCie/common/common.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c index a62bf9f..d828685 100644 --- a/board/LaCie/common/common.c +++ b/board/LaCie/common/common.c @@ -52,10 +52,18 @@ void mv_phy_88e1318_init(const char *name, u16 phyaddr) /* * Set control mode 4 for LED[0]. */
- #ifndef CONFIG_CLOUDBOX miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3); miiphy_read(name, phyaddr, 16, ®); reg |= 0xf; miiphy_write(name, phyaddr, 16, reg);
- #else
- miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3);
- miiphy_read(name, phyaddr, 17, ®);
- reg &= ~0x3f;
- reg |= 0x15;
- miiphy_write(name, phyaddr, 17, reg);
- #endif
This doesn't look very common but I can't figure out a more elegant way.
Acked-by: Simon Guinot simon.guinot@sequanux.org