Re: [U-Boot] [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices

Hi Stuart,

-----Original Message----- From: Stuart Yoder [mailto:stuart.yoder@nxp.com] Sent: Monday, February 22, 2016 11:26 PM To: u-boot@lists.denx.de Cc: york sun york.sun@nxp.com; Prabhakar Kushwaha prabhakar.kushwaha@nxp.com; Mingkai Hu mingkai.hu@nxp.com; Minghuan Lian minghuan.lian@nxp.com; Yang-Leo Li leoyang.li@nxp.com; marc.zyngier@arm.com; Stuart Yoder stuart.yoder@nxp.com Subject: [PATCH 7/7] pci/layerscape: set LUT and msi-map for discovered PCI devices

From: Stuart Yoder stuart.yoder@nxp.com

for all PCI devices discovered in a system: -allocate a LUT (look-up-table) entry in that PCI controller -allocate a stream ID for the device -program and enable a LUT entry (maps PCI requester id to stream ID) -set the msi-map property on the controller reflecting the LUT mapping

basic bus scanning loop/logic was taken from drivers/pci/pci.c pci_hose_scan_bus().

Signed-off-by: Stuart Yoder stuart.yoder@nxp.com

drivers/pci/pcie_layerscape.c | 68 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+)

diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index dfafaf2..eaac9e1 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -569,6 +569,70 @@ static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie, fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1); }

+static void fdt_fixup_pcie(void *blob) +{

• unsigned int found_multi = 0;
• unsigned char header_type;
• int index;
• u32 streamid;
• pci_dev_t dev;
• int bus;
• unsigned short id;
• struct pci_controller *hose;
• struct ls_pcie *pcie;
• int i;
• for (i = 0, hose = pci_get_hose_head(); hose; hose = hose->next, i++) {

• pcie = hose->priv_data;
  

• for (bus = hose->first_busno; bus <= hose->last_busno; bus++) {
  

• 	for (dev =  PCI_BDF(bus, 0, 0);
  

• 	     dev <  PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
  

• 			    PCI_MAX_PCI_FUNCTIONS - 1);
  

• 	     dev += PCI_BDF(0, 0, 1)) {
  

• 		/* skip the host bridge */
  

• 		if (dev == PCI_BDF(0, 0, 0))
  

• 			continue;
  

[Lian Minghuan-B31939] PCIe controller also needs a stream ID. It may request a MSI for AER PME hotplug service.

• 		if (PCI_FUNC(dev) && !found_multi)
  

• 			continue;
  

• 		pci_read_config_word(dev, PCI_VENDOR_ID, &id);
  

• 		pci_read_config_byte(dev, PCI_HEADER_TYPE,
  

• 				     &header_type);
  

• 		if ((id == 0xFFFF) || (id == 0x0000))
  

• 			continue;
  

• 		if (!PCI_FUNC(dev))
  

• 			found_multi = header_type & 0x80;
  

• 		streamid = ls_pcie_next_streamid();
  

• 		if (streamid < 0) {
  

• 			printf("ERROR: no stream ids free\n");
  

• 			continue;
  

• 		}
  

• 		index = ls_pcie_next_lut_index(pcie);
  

• 		if (index < 0) {
  

• 			printf("ERROR: no LUT indexes free\n");
  

• 			continue;
  

• 		}
  

• 		/* map PCI b.d.f to streamID in LUT */
  

• 		ls_pcie_lut_set_mapping(pcie, index, dev >> 8,
  

• 					streamid);
  

• 		/* update msi-map in device tree */
  

• 		fdt_pcie_set_msi_map_entry(blob, pcie, dev >> 8,
  

• 					   streamid);
  

• 	}
  

• }
  

• }

+}

int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info) { struct ls_pcie *pcie; @@ -745,6 +809,10 @@ void ft_pci_setup(void *blob, bd_t *bd) #ifdef CONFIG_PCIE4 ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4); #endif

• #if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
• fdt_fixup_pcie(blob);
• #endif

}

#else

1.7.9.5