HI Vignesh,
On Tue, Sep 24, 2019 at 9:59 AM Vignesh Raghavendra vigneshr@ti.com wrote:
Hi Simon,
On 24/09/19 12:32 PM, Simon Goldschmidt wrote:
Hi Vignesh,
On Tue, Sep 24, 2019 at 7:55 AM Vignesh Raghavendra vigneshr@ti.com wrote:
This series removes SPI_NOR_4B_OPCODES flags from legacy variants of n25q256* and n25q512* and adds entries for newer variants of those flashes that support 4 Byte opcodes.
I don't have the flash devices. So its only compile tested.
Ashish, Simon,
I would greatly appreciate if you could test these patches and make sure 4 Byte opcodes are being used. (Probably by enabling/adding prints to cmd->opcode in spi_mem_exec_op() in drivers/spi/spi-mem.c
As written in my last mail, I currently cannot get SFDP to work on my board: I keep getting 0xffdddfdf instead of 0x50444653 (SFDP_SIGNATURE).
Did it ever work on your board ie did you test it when you were testing my patches porting SPI NOR framework from kernel?
I tested that series on the EBV Socrates (socfpga_socrates), while this is our custom board. It is similar, but the flash chips are different. So unfortunately, I don't know if it ever worked...
I'll try to run this series on socfpga_socrates soon.
What's the controller driver? Cadence QSPI?
Yes.
Regards, Simon
Regards Vignesh
Any idea for a reason of that? That device I have here seems to be equipped with an MT25QL256ABA, but that should not be an issue, I think.
Regards, Simon
Euginey,
Could you test this series on top of latest u-boot master and confirm that your test cases still work?
Regards Vignesh
Vignesh Raghavendra (3): spi-nor: spi-nor-ids: Disable SPI_NOR_4B_OPCODES for n25q512* and n25q256* spi-nor: spi-nor-ids: Rename mt25qu512a entry spi-nor: spi-nor-ids: Add entries for newer variants of n25q256* and n25q512*
drivers/mtd/spi/spi-nor-ids.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
-- 2.23.0
-- Regards Vignesh