There's checks in board/sunxi/board.c if either MACPWR or SATAPWR are defined and they are defined by default to a empty string which means on vast majority of AllWinner boards when they're not required the code is still run and with SATAPWR we even get an unnecessary 500ms delay booting. So let's not define a default for these options so the code is only run for boards that need it.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- arch/arm/mach-sunxi/Kconfig | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 49ef217f08..a566e10315 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -578,7 +578,6 @@ config OLD_SUNXI_KERNEL_COMPAT
config MACPWR string "MAC power pin" - default "" help Set the pin used to power the MAC. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. @@ -969,7 +968,6 @@ endchoice
config SATAPWR string "SATA power pin" - default "" help Set the pins used to power the SATA. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of