Using macro's for flash power up read-only access code leads wrong behaviour hence use idcode0 for runtime detection, hence the flash which require this functionality gets detected at runtime.
Signed-off-by: Jagan Teki jteki@openedev.com --- drivers/mtd/spi/sf_internal.h | 1 + drivers/mtd/spi/sf_ops.c | 7 +++---- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 8f586ee..b8692c6 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -66,6 +66,7 @@ enum spi_nor_option_flags { #define SPI_FLASH_CFI_MFR_MACRONIX 0xc2 #define SPI_FLASH_CFI_MFR_SST 0xbf #define SPI_FLASH_CFI_MFR_WINBOND 0xef +#define SPI_FLASH_CFI_MFR_ATMEL 0x1f
/* Erase commands */ #define CMD_ERASE_4K 0x20 diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index ab21f02..80eac39 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -941,11 +941,10 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash) }
/* Flash powers up read-only, so clear BP# bits */ -#if defined(CONFIG_SPI_FLASH_ATMEL) || \ - defined(CONFIG_SPI_FLASH_MACRONIX) || \ - defined(CONFIG_SPI_FLASH_SST) + if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL || + idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX || + idcode[0] == SPI_FLASH_CFI_MFR_SST) write_sr(flash, 0); -#endif
/* Assign spi data */ flash->spi = spi;