Re: [U-Boot] ARM: k2e/l: Apply WA for selecting PA clock source

On Thu, Oct 08, 2015 at 11:31:47AM +0530, Lokesh Vutla wrote:

On keystone2 Lamarr and Edison platforms, the PA clocksource mux in PLL REG1, can be changed only after enabling its clock domain. So selecting the output of PASS PLL as input to PA only after enabling the clockdomain. This is as per the debug done by "Vitaly Andrianov vitalya@ti.com" and based on the previous work done by "Hao Zhang hzhang@ti.com"

Fixes: d634a0775bcf ("ARM: keystone2: Cleanup PLL init code") Reported-by: Vitaly Andrianov vitalya@ti.com Tested-by: Vitaly Andrianov vitalya@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com

Applied to u-boot/master, thanks!