Yes after defining CONFIG_NETCONSOLE in my board config file I could access U-Boot shell through network! But after rebooting my target, console is back
OK.
to serial! I have changed environment variables 'stdin' 'stdout' to "nc" and saved using 'saveenv' command. Is there anything am I missing?? How do I make my target to use netconsole always?
You can either manually set the standard I/O channels by re-assigning the I/O channels in your board specific init code, or (and this is the recommended approach) by putting the appropriate "setenv stdin nc;..." commands in your "preboot" environment variable which gets executed automatically before entring the main loop. Note that you have top enable this feature in the board config file, too (unless it already is on, which is problebly the case on your board).
Sorry It was my exchange server who appended my mail with "DISCLAIMER"! I request you please ignore "DISCLAIMER" message! Or else in feature I can use my public server mail ID(gmail) to post my queries! But please don't send
Please do.
the police!!!
:-)
Hope this message doesn't contain any HTML information!
...
------_=_NextPart_001_01C59C2A.1A70E836 Content-Type: text/html Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
Unfortunately it does. Please turn this off.
Best regards,
Wolfgang Denk