Re: [U-Boot] MPC8377: SVR wrong ?

André Schwarz wrote:

It's a hardware issue - the 837x are distinguished by ID Pins. Unfortunately they are buried within the listing of power pins and are not named exclusively ... bloody documentation.

I can't talk about the MPC8377CVRALG specifically, but using pin configs to change the ID of the chip is not unusual. A dip switch setting on the P1022DS board will change the P1022 into a P1013, and the SVR will change accordingly.

Perhaps your pin config is not set to the "default" for the chip you ordered, which is why it looks like a different chip?