Use the new sequence number in all cases. Drop the logic to check for a valid number in designware_i2c, since it will always be valid.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
drivers/i2c/designware_i2c_pci.c | 22 +--------------------- drivers/i2c/i2c-uclass.c | 8 +------- drivers/i2c/i2c-versatile.c | 5 ----- drivers/i2c/intel_i2c.c | 12 +----------- drivers/i2c/muxes/i2c-mux-uclass.c | 4 ++-- drivers/i2c/mvtwsi.c | 6 +++--- 6 files changed, 8 insertions(+), 49 deletions(-)
diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c index 04921a304ac..9237726b475 100644 --- a/drivers/i2c/designware_i2c_pci.c +++ b/drivers/i2c/designware_i2c_pci.c @@ -90,32 +90,12 @@ static int designware_i2c_pci_probe(struct udevice *dev)
static int designware_i2c_pci_bind(struct udevice *dev) { - struct uclass *uc; char name[20]; - int ret;
if (dev_of_valid(dev)) return 0;
- /* - * Create a unique device name for PCI type devices - * ToDo: - * Setting req_seq in the driver is probably not recommended. - * But without a DT alias the number is not configured. And - * using this driver is impossible for PCIe I2C devices. - * This can be removed, once a better (correct) way for this - * is found and implemented. - * - * TODO(sjg@chromium.org): Perhaps if uclasses had platdata this would - * be possible. We cannot use static data in drivers since they may be - * used in SPL or before relocation. - */ - ret = uclass_get(UCLASS_I2C, &uc); - if (ret) - return ret; - - dev->req_seq = uclass_find_next_free_req_seq(uc); - sprintf(name, "i2c_designware#%u", dev->req_seq); + sprintf(name, "i2c_designware#%u", dev_seq(dev)); device_set_name(dev, name);
return 0; diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c index 5c4626b0442..2625bd72dc8 100644 --- a/drivers/i2c/i2c-uclass.c +++ b/drivers/i2c/i2c-uclass.c @@ -700,13 +700,7 @@ static int i2c_post_bind(struct udevice *dev) if (!priv) return -ENOMEM;
- debug("%s: %s, req_seq=%d\n", __func__, dev->name, dev->req_seq); - - /* if there is no alias ID, use the first free */ - if (dev->req_seq == -1) - dev->req_seq = ++priv->max_id; - - debug("%s: %s, new req_seq=%d\n", __func__, dev->name, dev->req_seq); + debug("%s: %s, seq=%d\n", __func__, dev->name, dev_seq(dev));
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) ret = dm_scan_fdt_dev(dev); diff --git a/drivers/i2c/i2c-versatile.c b/drivers/i2c/i2c-versatile.c index 62831522bd3..69042d54205 100644 --- a/drivers/i2c/i2c-versatile.c +++ b/drivers/i2c/i2c-versatile.c @@ -252,11 +252,6 @@ static int versatile_i2c_probe(struct udevice *dev)
priv->base = (phys_addr_t)dev_read_addr(dev); priv->delay = 25; /* 25us * 4 = 100kHz */ - /* - * U-Boot still doesn't assign automatically - * sequence numbers to devices - */ - dev->req_seq = 1;
return 0; } diff --git a/drivers/i2c/intel_i2c.c b/drivers/i2c/intel_i2c.c index 3b79cb40cd3..66d017a2615 100644 --- a/drivers/i2c/intel_i2c.c +++ b/drivers/i2c/intel_i2c.c @@ -269,21 +269,11 @@ static int intel_i2c_probe(struct udevice *dev)
static int intel_i2c_bind(struct udevice *dev) { - static int num_cards __attribute__ ((section(".data"))); char name[20];
/* Create a unique device name for PCI type devices */ if (device_is_on_pci_bus(dev)) { - /* - * ToDo: - * Setting req_seq in the driver is probably not recommended. - * But without a DT alias the number is not configured. And - * using this driver is impossible for PCIe I2C devices. - * This can be removed, once a better (correct) way for this - * is found and implemented. - */ - dev->req_seq = num_cards; - sprintf(name, "intel_i2c#%u", num_cards++); + sprintf(name, "intel_i2c#%u", dev_seq(dev)); device_set_name(dev, name); }
diff --git a/drivers/i2c/muxes/i2c-mux-uclass.c b/drivers/i2c/muxes/i2c-mux-uclass.c index 26897554b0f..9a8cf8fb172 100644 --- a/drivers/i2c/muxes/i2c-mux-uclass.c +++ b/drivers/i2c/muxes/i2c-mux-uclass.c @@ -87,8 +87,8 @@ static int i2c_mux_post_bind(struct udevice *mux)
ret = device_bind_driver_to_node(mux, "i2c_mux_bus_drv", full_name, node, &dev); - debug(" - bind ret=%d, %s, req_seq %d\n", ret, - dev ? dev->name : NULL, dev->req_seq); + debug(" - bind ret=%d, %s, seq %d\n", ret, + dev ? dev->name : NULL, dev_seq(dev)); if (ret) return ret; } diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index 14c594d648b..875893af6b0 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -823,9 +823,9 @@ static int mvtwsi_i2c_bind(struct udevice *bus) struct mvtwsi_registers *twsi = dev_read_addr_ptr(bus);
/* Disable the hidden slave in i2c0 of these platforms */ - if ((IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARCH_KIRKWOOD) - || IS_ENABLED(CONFIG_ARMADA_8K)) - && bus->req_seq == 0) + if ((IS_ENABLED(CONFIG_ARMADA_38X) || + IS_ENABLED(CONFIG_ARCH_KIRKWOOD) || + IS_ENABLED(CONFIG_ARMADA_8K)) && !dev_seq(bus)) twsi_disable_i2c_slave(twsi);
return 0;