Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted.
Signed-off-by: Jon Loeliger jdl@freescale.com --- board/jupiter/jupiter.c | 4 ++-- board/kup/common/pcmcia.c | 2 +- board/lwmon/lwmon.c | 2 +- board/lwmon/pcmcia.c | 2 +- board/mcc200/auto_update.c | 2 +- board/mcc200/mcc200.c | 4 ++-- board/netta/pcmcia.c | 2 +- board/pcippc2/pcippc2.c | 2 +- board/pm520/pm520.c | 4 ++-- board/r360mpi/pcmcia.c | 2 +- board/sacsng/sacsng.c | 2 +- board/siemens/pcu_e/pcu_e.c | 2 +- board/sixnet/sixnet.c | 2 +- board/ssv/adnpesc1/adnpesc1.c | 2 +- board/ssv/common/cmd_sled.c | 2 +- board/ssv/common/wd_pio.c | 2 +- board/total5200/total5200.c | 4 ++-- board/tqm5200/cmd_stk52xx.c | 2 +- board/tqm5200/cmd_tb5200.c | 2 +- board/tqm5200/tqm5200.c | 4 ++-- board/tqm8272/tqm8272.c | 2 +- board/trab/auto_update.c | 2 +- board/trab/cmd_trab.c | 2 +- board/trab/trab_fkt.c | 20 ++++++++++---------- board/uc100/pcmcia.c | 2 +- board/v38b/v38b.c | 4 ++-- board/xilinx/ml300/serial.c | 2 +- 27 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index 04fda4a..b227487 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -281,7 +281,7 @@ void pci_init_board(void) } #endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset (void) { @@ -306,7 +306,7 @@ void ide_set_reset (int idereset) *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; } } -#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +#endif
#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) void diff --git a/board/kup/common/pcmcia.c b/board/kup/common/pcmcia.c index b00f794..def38f1 100644 --- a/board/kup/common/pcmcia.c +++ b/board/kup/common/pcmcia.c @@ -144,7 +144,7 @@ int pcmcia_hardware_disable(int slot)
return (0); } -#endif /* CFG_CMD_PCMCIA */ +#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp) diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index bb0ab55..c68978a 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -960,7 +960,7 @@ U_BOOT_CMD( "lsb - print current setting\n" );
-#endif /* CFG_CMD_BSP */ +#endif
/*----------------------------- Utilities -----------------------------*/ /*********************************************************************** diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c index fbab904..ebca7a2 100644 --- a/board/lwmon/pcmcia.c +++ b/board/lwmon/pcmcia.c @@ -166,7 +166,7 @@ int pcmcia_hardware_disable(int slot)
return (0); } -#endif /* CFG_CMD_PCMCIA */ +#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp) diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 1df6317..6044565 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -45,7 +45,7 @@ #endif
#if !defined(CONFIG_CMD_FAT) -#error "must define CFG_CMD_FAT" +#error "must define CONFIG_CMD_FAT" #endif
#undef AU_DEBUG diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 573db02..a4c4644 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -307,7 +307,7 @@ void pci_init_board(void) } #endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset (void) { @@ -320,7 +320,7 @@ void ide_set_reset (int idereset) debug ("ide_reset(%d)\n", idereset);
} -#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +#endif
#if defined(CONFIG_CMD_DOC) extern void doc_probe (ulong physadr); diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c index 693e077..86b3cfb 100644 --- a/board/netta/pcmcia.c +++ b/board/netta/pcmcia.c @@ -291,7 +291,7 @@ int pcmcia_hardware_disable(int slot)
return (0); } -#endif /* CFG_CMD_PCMCIA */ +#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp) diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 6a37e2f..1148c6a 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -241,5 +241,5 @@ U_BOOT_CMD( "wd - print current status\n" );
-#endif /* CFG_CMD_BSP */ +#endif #endif /* CONFIG_WATCHDOG */ diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index 1714e35..14c3f1d 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -299,7 +299,7 @@ void pci_init_board(void) } #endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset (void) { @@ -312,7 +312,7 @@ void ide_set_reset (int idereset) debug ("ide_reset(%d)\n", idereset);
} -#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +#endif
#if defined(CONFIG_CMD_DOC) extern void doc_probe (ulong physadr); diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c index c5e3990..a83ca8d 100644 --- a/board/r360mpi/pcmcia.c +++ b/board/r360mpi/pcmcia.c @@ -150,7 +150,7 @@ int pcmcia_hardware_disable(int slot)
return (0); } -#endif /* CFG_CMD_PCMCIA */ +#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp) diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c index 208f21e..25209e0 100644 --- a/board/sacsng/sacsng.c +++ b/board/sacsng/sacsng.c @@ -873,7 +873,7 @@ spi_chipsel_type spi_chipsel[] = { }; int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-#endif /* CFG_CMD_SPI */ +#endif
#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index 6c37445..2309069 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -408,7 +408,7 @@ U_BOOT_CMD (puma, 4, 1, do_puma, "status - print PUMA status\n" "puma load addr len - load PUMA configuration data\n");
-#endif /* CFG_CMD_BSP */ +#endif
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c index 41c74f6..798e185 100644 --- a/board/sixnet/sixnet.c +++ b/board/sixnet/sixnet.c @@ -77,7 +77,7 @@ int checkboard (void)
#if defined(CONFIG_CMD_PCMCIA) #error "SXNI855T has no PCMCIA port" -#endif /* CFG_CMD_PCMCIA */ +#endif
/* ------------------------------------------------------------------------- */
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c index 8edbd70..2ec3a72 100644 --- a/board/ssv/adnpesc1/adnpesc1.c +++ b/board/ssv/adnpesc1/adnpesc1.c @@ -89,7 +89,7 @@ spi_chipsel_type spi_chipsel[] = { }; int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-#endif /* CFG_CMD_SPI */ +#endif
#if defined(CONFIG_POST) /* diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index 8cdf45a..713ed65 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -158,5 +158,5 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (sled, 3, 0, do_sled, "sled - check and set status led\n", "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n"); -#endif /* CFG_CMD_BSP */ +#endif #endif /* CONFIG_STATUS_LED */ diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c index 69e9ed7..9945c59 100644 --- a/board/ssv/common/wd_pio.c +++ b/board/ssv/common/wd_pio.c @@ -156,5 +156,5 @@ U_BOOT_CMD( "wd off - switch watchdog off\n" "wd - print current status\n" ); -#endif /* CFG_CMD_BSP */ +#endif #endif /* CONFIG_HW_WATCHDOG */ diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index 1a35187..f32dadf 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -109,7 +109,7 @@ void pci_init_board(void) } #endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
/* IRDA_1 aka PSC6_3 (pin C13) */ #define GPIO_IRDA_1 0x20000000UL @@ -133,7 +133,7 @@ void ide_set_reset (int idereset) *(vu_long *) MPC5XXX_GPIO_DATA_O |= GPIO_IRDA_1; } } -#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +#endif
#ifdef CONFIG_VIDEO_SED13806 #include <sed13806.h> diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c index 802332f..b746679 100644 --- a/board/tqm5200/cmd_stk52xx.c +++ b/board/tqm5200/cmd_stk52xx.c @@ -1241,4 +1241,4 @@ U_BOOT_CMD( " - loopback plug(s) for X21/X22 required\n" ); #endif -#endif /* CFG_CMD_BSP */ +#endif diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqm5200/cmd_tb5200.c index cd141c1..214dca6 100644 --- a/board/tqm5200/cmd_tb5200.c +++ b/board/tqm5200/cmd_tb5200.c @@ -101,4 +101,4 @@ U_BOOT_CMD( );
#endif /* CONFIG_STK52XX */ -#endif /* CFG_CMD_BSP */ +#endif diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index cf97603..51f4aeb 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -336,7 +336,7 @@ void pci_init_board(void) } #endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
#if defined (CONFIG_MINIFAP) #define SM501_POWER_MODE0_GATE 0x00000040UL @@ -389,7 +389,7 @@ void ide_set_reset (int idereset) } #endif } -#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +#endif
#ifdef CONFIG_POST /* diff --git a/board/tqm8272/tqm8272.c b/board/tqm8272/tqm8272.c index 653b7a9..7bd6401 100644 --- a/board/tqm8272/tqm8272.c +++ b/board/tqm8272/tqm8272.c @@ -1212,7 +1212,7 @@ int board_nand_init(struct nand_chip *nand) return 0; }
-#endif /* CFG_CMD_NAND */ +#endif
#ifdef CONFIG_PCI struct pci_controller hose; diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c index ad88867..ef40c54 100644 --- a/board/trab/auto_update.c +++ b/board/trab/auto_update.c @@ -47,7 +47,7 @@ #endif
#if !defined(CONFIG_CMD_FAT) -#error "must define CFG_CMD_FAT" +#error "must define CONFIG_CMD_FAT" #endif
/* diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 2db6a34..daa6aee 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -893,4 +893,4 @@ U_BOOT_CMD( " For each measurment a timestamp is printeted\n" );
-#endif /* CFG_CMD_BSP */ +#endif diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index 56a80ff..7273ef9 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -155,7 +155,7 @@ int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer, int len); int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer, int len); -#endif /* CFG_CMD_I2C */ +#endif
/* * TRAB board specific commands. Especially commands for burn-in and function @@ -1019,10 +1019,10 @@ static int touch_write_clibration_values (int calib_point, int x, int y) } return 1; #else - printf ("No I2C support enabled (CFG_CMD_I2C), could not write " + printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write " "to EEPROM\n"); return (1); -#endif /* CFG_CMD_I2C */ +#endif }
@@ -1130,10 +1130,10 @@ int do_serial_number (char **argv) printf ("%s: unknown command %s\n", __FUNCTION__, argv[2]); return (1); /* unknown command, return error */ #else - printf ("No I2C support enabled (CFG_CMD_I2C), could not write " + printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write " "to EEPROM\n"); return (1); -#endif /* CFG_CMD_I2C */ +#endif }
@@ -1160,10 +1160,10 @@ int do_crc16 (void) } return (0); #else - printf ("No I2C support enabled (CFG_CMD_I2C), could not write " + printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write " "to EEPROM\n"); return (1); -#endif /* CFG_CMD_I2C */ +#endif }
@@ -1272,10 +1272,10 @@ int do_eeprom (char **argv) printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); return (1); #else - printf ("No I2C support enabled (CFG_CMD_I2C), could not write " + printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write " "to EEPROM\n"); return (1); -#endif /* CFG_CMD_I2C */ +#endif }
#if defined(CONFIG_CMD_I2C) @@ -1408,4 +1408,4 @@ int i2c_read_multiple ( uchar chip, uint addr, int alen, } return (0); } -#endif /* CFG_CMD_I2C */ +#endif diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c index 74d29b9..407bdb7 100644 --- a/board/uc100/pcmcia.c +++ b/board/uc100/pcmcia.c @@ -149,7 +149,7 @@ int pcmcia_hardware_disable(int slot)
return (0); } -#endif /* CFG_CMD_PCMCIA */ +#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp) diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c index ace4aa2..ec032ee 100644 --- a/board/v38b/v38b.c +++ b/board/v38b/v38b.c @@ -224,7 +224,7 @@ int board_early_init_r(void) }
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) void init_ide_reset(void) { debug("init_ide_reset\n"); @@ -248,7 +248,7 @@ void ide_set_reset(int idereset) } else *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; } -#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ +#endif
#ifdef CONFIG_HW_WATCHDOG diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c index 09a3dc3..ba41f85 100644 --- a/board/xilinx/ml300/serial.c +++ b/board/xilinx/ml300/serial.c @@ -151,4 +151,4 @@ kgdb_interruptible(int yes) { return; } -#endif /* CFG_CMD_KGDB */ +#endif