This patch series introduces the mx6 based cm-fx6 board. cm-fx6 comes with either single, dual, or quad core mx6 soc, and various dram configurations.
First 11 patches are preparatory steps which include: - Cleanups and bug fixes for the mx6 dram config code - New functions and macros for enabling clocks, i2c setup, and querying the status of sata port - Support for M25PE16 and M25PX16 spi flashes - sf probe command fix
Cc: Igor Grinberg grinberg@compulab.co.il Cc: Stefano Babic sbabic@denx.de Cc: Tom Rini trini@ti.com
Nikita Kiryanov (18): spl: improve spi configuration mx6: add clock enabling functions sf: fix sf probe mtd: spi: add support for M25PE16 and M25PX16 compulab: eeprom: add support for defining eeprom i2c bus sata: dwc_ahsata: implement sata_port_status i2c: imx: add macros to setup pads for multiple SoC types arm: mx6: ddr: cleanup arm: mx6: ddr: do not write into reserved bit arm: mx6: ddr: configure MMDC for slow_pd arm: mx6: ddr: fix cs0_end calculation arm: mx6: add support for Compulab cm-fx6 CoM arm: mx6: cm_fx6: add nand support arm: mx6: cm_fx6: add ethernet support arm: mx6: cm_fx6: add usb support arm: mx6: cm_fx6: add i2c support arm: mx6: cm_fx6: use eeprom arm: mx6: cm_fx6: add sata support
README | 7 + arch/arm/cpu/armv7/mx6/clock.c | 99 ++++++ arch/arm/cpu/armv7/mx6/ddr.c | 272 +++++++-------- arch/arm/include/asm/arch-mx6/clock.h | 5 + arch/arm/include/asm/imx-common/mxc_i2c.h | 33 ++ board/boundary/nitrogen6x/nitrogen6x.c | 5 + board/compulab/cm_fx6/Makefile | 12 + board/compulab/cm_fx6/cm_fx6.c | 477 ++++++++++++++++++++++++++ board/compulab/cm_fx6/common.c | 83 +++++ board/compulab/cm_fx6/common.h | 53 +++ board/compulab/cm_fx6/imximage.cfg | 8 + board/compulab/cm_fx6/spl.c | 409 ++++++++++++++++++++++ board/compulab/common/eeprom.c | 10 +- board/embest/mx6boards/mx6boards.c | 5 + board/freescale/mx6qsabreauto/mx6qsabreauto.c | 7 + board/freescale/mx6sabresd/mx6sabresd.c | 7 + board/freescale/mx6slevk/mx6slevk.c | 5 + board/gateworks/gw_ventana/gw_ventana.c | 7 +- board/genesi/mx51_efikamx/efikamx.c | 5 + board/ttcontrol/vision2/vision2.c | 5 + boards.cfg | 2 + drivers/block/dwc_ahsata.c | 17 + drivers/mtd/spi/sf_params.c | 2 + drivers/mtd/spi/spi_spl_load.c | 15 +- drivers/spi/mxc_spi.c | 48 +-- include/configs/cm_fx6.h | 310 +++++++++++++++++ include/configs/cm_t335.h | 1 + include/configs/cm_t35.h | 1 + include/configs/cm_t54.h | 1 + include/configs/embestmx6boards.h | 2 +- include/configs/gw_ventana.h | 2 +- include/configs/mx51_efikamx.h | 4 +- include/configs/mx6sabre_common.h | 2 +- include/configs/mx6slevk.h | 2 +- include/configs/nitrogen6x.h | 2 +- include/configs/vision2.h | 4 +- include/sata.h | 1 + 37 files changed, 1756 insertions(+), 174 deletions(-) create mode 100644 board/compulab/cm_fx6/Makefile create mode 100644 board/compulab/cm_fx6/cm_fx6.c create mode 100644 board/compulab/cm_fx6/common.c create mode 100644 board/compulab/cm_fx6/common.h create mode 100644 board/compulab/cm_fx6/imximage.cfg create mode 100644 board/compulab/cm_fx6/spl.c create mode 100644 include/configs/cm_fx6.h