Hi Macpaul, Fabien,
I'm referring to patch series https://patchwork.ozlabs.org/project/uboot/patch/20230804110448.24589-1-macp... where support for the mediatek mt8195 SOC is introduced into u-boot. We are developing a board based on the mt8195 as well but we want to use UART1 instead of UART0 for debug output messages.
Our board is booting and we see boot messages on a debug pin header connected to UART0 when using the settings from the demo board, but when trying to switch to UART1, no more messages appear on the console. What we have tried is the following:
- Adaptation of the dts and dtsi files with uart1 settings taken from linux device tree:
diff --git a/arch/arm/dts/mt8195.dtsi b/arch/arm/dts/mt8195.dtsi index a7e4db5aa7..53eb437fad 100644 --- a/arch/arm/dts/mt8195.dtsi +++ b/arch/arm/dts/mt8195.dtsi @@ -245,6 +245,17 @@ status = "disabled"; };
+ uart1: serial@11001200 { + compatible = "mediatek,mt8195-uart", + "mediatek,hsuart"; + reg = <0 0x11001200 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <26000000>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + pericfg_ao: syscon@11003000 { compatible = "mediatek,mt8195-pericfg_ao", "syscon"; reg = <0 0x11003000 0 0x1000>;
diff --git a/arch/arm/dts/mt8195-kontron-sbc-i1200.dts b/arch/arm/dts/mt8195-kontron-sbc-i1200.dts index c6ea7e8f3d..4700a6d303 100644 --- a/arch/arm/dts/mt8195-kontron-sbc-i1200.dts +++ b/arch/arm/dts/mt8195-kontron-sbc-i1200.dts @@ -58,7 +58,7 @@ };
chosen { - stdout-path = &uart0; + stdout-path = &uart1; };
reg_1p8v: regulator-1p8v { @@ -121,7 +121,7 @@ status = "okay"; };
-&uart0 { +&uart1 { status = "okay"; };
We also tried to change the DEBUG_UART settings in the defconfig to match with UART1, but without success.
Are there any special means to make UART1 interface run?
Best regards, Thomas
Thomas Schäfer SW Design Engineer
T: +49 681 95916 203
thomas.schaefer@kontron.com www.kontron.com
Kontron Europe GmbH Heinrich-Barth-Straße 1-1a | 66115 Saarbrücken | Germany
Die gesetzlichen Pflichtangaben finden Sie hier Please find our mandatory legal statement here Unsere Datenschutzerklärung finden Sie hier Please find our mandatory privacy statement here